other standards
GB/T 706-1988 Dimensions, shapes, weights and allowable deviations of hot-rolled I-beams
GB/T 706-1988 Hot Rolled Steel Angles Dimensions,Shape,Weight and Tolerances
This GB/T 706-1988 standard specifies the size, shape, weight, and tolerance for hot rolled steel angles. Hot rolled steel angles are widely used for many applications, such as various structures and engineering projects......
1029 
Sophie
GB/T 707-1988 Dimensions, shape, weight and allowable deviation of hot-rolled channel steel
Hot Rolled Grooved Steel size, Shape, Weight and Tolerances
Hot rolled grooved steel is widely used in a variety of industries, including automotive, construction, engineering, manufacturing, and architecture. The finished product is valued for its strength and other properties, making it an essen......
Mechanical properties and technological properties of GB/T 4171-2000 high weathering structural steel
GB/T 4171-2000 High-Weatherability Structural Steel Mechanical and Technological Properties
GB/T 4171-2000 High-weatherability structural steel is a special type of steel specifically developed for use in environments with greater than normal exposure to the elements. Steel can be exposed to air,......
GB/T 9788-1988 Dimensions, shape, weight and allowable deviation of hot-rolled unequal angle steel
GB/T 9788-1988 Hot Rolled Unequal Angles: Dimensions, Shape, Mass and Permissible Deviations
This standard applies to hot rolled unequal angles for use in structural engineering.
The size tolerance for dimensions such as width (tolerance for the range of ± 0.4 to ± 5 mm) and length shall be i......
Manufacturing method and delivery status of seamless steel pipes for high-pressure chemical fertilizer equipment (GB 6479-2000)
GB 6479-2000
Seamless Steel Pipes for High Pressure Fertilizer Equipment Manufacture and Delivery State
This standard deals with the seamless steel pipes that are used in high pressure fertilizer equipment, specifying the requirements and delivery states of the pipes.
1. Scope
This standard spe......
Mechanical Properties of Seamless Steel Tubes for High Pressure Fertilizer Equipment (GB 6479-2000)
The Mechanical Properties of Seamless Steel Pipes for High Pressure Fertilizer Equipment (GB 6479-2000)
The mechanical properties of seamless steel pipes for high-pressure fertilizer equipment (GB 6479-2000) refer to the properties of materials and the performance of various products in the produ......
Manufacturing method and delivery status of seamless steel tubes for structural purposes (GB/T 8162-1999)
Method for Manufacturing and Delivery Status of Seamless Steel Pipe for Structural Usage (GB/T 8162-1999)
Seamless steel pipes are extremely common in structural applications as they are used for critical components for axial and torsional loads. Therefore, it is incredibly important that the fab......
Surface quality and ultrasonic inspection of structural seamless steel pipes (GB/T 8162-1999)
Surface Quality and Ultrasonic Testing of Seamless Steel Pipe for Structural Use (GB/T 8162-1999)
Seamless steel pipe is widely used in the construction and other industries due to its good strength, corrosion resistance and high temperature resistance. To ensure the quality of high-pressure se......
Technical conditions for cold-formed steel (GB/T 6725-1992)
GB/T 6725-1992 Cold-bent steel technical conditions
This general technical conditions for cold-bent steel GB/T 6725-1992 stipulates the order and technical requirements for the cold-bent of steel plates and narrow strips.
This code is applicable to cold-bent steel plates with thickness of ≤1.5......
Delivery state, grade and chemical composition of hot-rolled H-shaped steel and split T-shaped steel (GB/T 11263-1998)
，
Hot rolled H-shaped steel is one of the most popular and widely used structural steel products in todays market. It is mostly used in areas with relatively high load bearing capacity, such as buildings and bridges. The delivery status and grades of the hot rolled H-section steel are different ac......
Popular Entries
- New AWS standard
- GB/T 4171—2000 High Weathering Structural Steel
- "ISO9000 family" standard
- Color marking of high-quality section steel
- GB 17926-1999 Compressed natural gas cylinder valves for vehicles
- Deposition efficiency
- Low alloy steel welding rod GB 5118-85
- The purpose of implementing the "ISO9000 family" standard
- Dimensional tolerances for electrolytic plates and rods of Japanese National Standards
- GB/T 714-2000 Designation and chemical composition of structural steel for bridges
- standard
- Comparison table of steel grades at home and abroad
- Metal Charpy (U-notch) impact test method GB229-84
- Code for Building Structure Loads (GB50009-2001)
- Civil Building Reliability Appraisal Standard (GB50292-1999)
Recent Updates
- Constant magnetic permeability alloy (GB/T15003-1994)
- Zirconium and zirconium alloy ingots for nuclear industry GB 8767-88
- GB 9446-88 Test method for cold cracking of welding pins
- American Wire Standard
- High saturation magnetic induction soft magnetic alloy (GB/T15002-1994)
- WS/T Allowable Concentration of Hazardous Substances in the Air of Working Environment in my country and Occupational Exposure Biological Limits
- Features and uses of SUS series products
- In 2008, a number of mandatory standards for the instrumentation industry will be formulated
- "ISO9000 family" standard
- Sample sampling method for chemical analysis of steel and allowable deviation of chemical composition of finished product
- Angang ordinary carbon structural steel and low alloy structural steel plate (JIS, BS)
- Dimensional tolerances for electrolytic plates and rods of Japanese National Standards
- Diameter of Japanese National Standard for Round Electrode Rods
- Japanese national standard cylindrical thread
- Japanese national standard conical thread circular electrode
- Allowable Deviation of Japanese National Standard Taper Thread Dimensions
Trending Keywords
Copyright © 2016 - 2024 by metal-knowledge.com. All rights reserved