Japan Standard Electrolytic Board and Rod Size Allowable Deviation
With the development of modern industry, electrical products are not only strong and durable, but also require precise size accuracy. The features of electronic components determine the characteristics of electronic products. Mechanical and electrical products play an important role in this regard. Japans national standards are formulated to ensure the quality of electronic products. Therefore, the product size deviation of the electrolytic board and rod must meet the Japan standard requirements.
The size deviation of electrolytic board and rod products determines whether the product works properly. In order to ensure the performance of electronic products, meets the requirements of Japan standards, and meets the needs of customers, it is necessary to measure the size deviation of electrolytic board and rod products accurately. The allowable deviation of size of the Japan Standard electrolytic board and rod ranges from 0.50 mm to 0.30 mm (depending on product size). The allowable deviation of size of the Japan Standard electrolytic board and rod also needs to be paid attention to.
The allowable deviation of size of Japan Standard electrolytic board and rod includes two aspects: the allowable deviation of length and the allowable deviation of thickness. The surface of the Japan Standard electrolytic board should be even and perpendicular to the longitudinal axis, and the thickness should not be less than 0.50 mm. The deviation value of the longitudinal direction is allowed to be 0.30 mm and 0.50 mm (depending on the part size), and the allowable deviation range of the thickness is 0.02 mm to 0.20 mm.
The Japan Standard size deviation of the products researched in this study covers the size deviation range of the electrolytic board, that is, the allowable deviation range mentioned above. The allowable size deviation value of the electrolytic board and rod products must be checked strictly before they are used in electronic products. The allowable deviation value should meet the requirements of the Japan Standard, and the quality of the products must be guaranteed.
The allowable deviation range of size of the Japanese Standard electrolytic board and rod is very small. Therefore, the actual measurement process is very careful and precise, and the accuracy requirements for measuring tools are high. If the deviation of board and rod size is not within the allowable range, then it must be rejected and returned to the supplier for improvement. At the same time, the supplier must bear the corresponding losses.
In conclusion, when using Japan Standard electrolytic board and rod products in electronic products, the allowable deviation range of size must meet the requirements of Japan Standard. The measurement must be strictly controlled and all products that are not qualified must be rejected. The allowable deviation range of size of the electrolytic board and rod affects the performance of electronic products, so the allowable deviation must be strictly controlled, and meet the requirements of the Japan Standard size deviation.
