Stainless steel
Chip shape and control of stainless steel chip breaking drill
Stainless Steel Chip Drill - Chip Formation and Control
Stainless steel chip drills provide reliable drilling and performance at a reasonable cost. But the effectiveness of these drills is dependent on knowing the optimal chip formation and control parameters. This article will review the optimal......
30/06/2023 
1095 
Sophie
stainless steel high temperature alloy
Introduction
Stainless steel high temperature alloy is a new type of high temperature alloy which has been widely used in aerospace, automobile, petrochemical industry and other fields due to its excellent mechanical properties, good oxidation resistance and high temperature strength, and is wide......
BS 1449/2-1983 Plate, sheet and strip Part 2: Mechanical properties of stainless and heat-resistant steel plate, sheet and strip
，介绍该标准内容
AS/NZS 1449/2-1983 Thick plate, Sheet and Strip-Part 2: Mechanical Properties of Stainless and Heat Resisting Steel Thick Plate, Sheet and Strip
AS/NZS 1449/2-1983 is an Australian Standard for the mechanical properties of stainless and heat resistant steels for thick plates, shee......
DIN1654/5-1989 Technical delivery conditions of steel and stainless steel for cold heading and cold extrusion
Cold heading and cold extrusion steels - Delivery conditions for stainless steels
1 Scope
This standard applies to unalloyed and alloyed stainless steels of the following steel numbers: 1.4301 (X5CrNi18-10), 1.4311 (X2CrNiN 18-7), 1.4541 (X6CrNiTi18-10), 1.4550 (X6CrNiNb18-10), 1.4571 (X6CrNiMoT......
Stainless steel wire rod (GB/T4356-1984)
Stainless steel bars
Stainless steel bars are an important component of many engineering projects. They are used in many applications, including fastening and vessel support. Stainless steel bars are versatile and durable materials that provide superior capabilities compared to other metals and ......
Introduction to stainless steel
Stainless steel is a steel alloy with a minimum of 10.5% chromium content by mass. It is highly corrosion resistant and is usually the material of choice when it comes to making domestic appliances and medical equipment due to its durability, strength and ability to withstand prolonged contact wit......
super stainless steel
Super Stainless Steel
Super stainless steel is a type of steel that comes with a higher than average level of corrosion resistance. It is this corrosion resistance that makes it a popular choice in many industries and applications.
Super stainless steel is made of a special grade of chromium, nick......
Introduction of Stainless Steel Scrap in my country
Stainless Steel Scrap in China
Stainless steel scrap is a valuable resource for China’s economy and industry. It has been used in a wide range of products ranging from kitchen appliances to medical equipment. Stainless steel scrap is available in two forms: ferrous and non-ferrous. Ferrous stain......
Stainless steel wire rod for welding (GB/T4241—1984)
Translation:
Welding stainless steel strips (GB / T4241-1984) is a kind of essential and challenging process performed by most manufacturers and fabricators that handle stainless steel, since it helps to create different alloys with specific mechanical qualities necessary for the fabrication of a ......
Brittle at 475°C
Brittle Fracture
Brittle fracture is a fracture that involves a material that does not exhibit any signs of plastic deformation. This type of fracture is seen in materials whose resistance to fracture is dominated by the strength of the material, rather than other factors such as work hardening, ......
Popular Entries
- Introduction to the steel grade of martensitic chromium stainless steel 3Cr13
- New stainless steel grades to replace 304 stainless steel
- Specification for solution treatment of austenitic stainless steel
- Experts teach you to buy stainless steel materials and products
- Common Defects and Correction Methods of Re-rolling Stainless Steel Sheets
- Properties and uses of stainless steel
- 0Cr15Ni5Cu3Nb(15–5PH) Fatigue and Fracture Toughness
- Chromium manganese series stainless steel
- 0Cr15Ni5Cu3Nb (15–5PH) process performance
- Chemical Composition of Austenitic Stainless Steel S32160 1Cr18Ni9Ti
- Mechanical Properties of Austenitic Stainless Steel S30478 0Cr19Ni10NbN
- 0Cr13Ni8Mo2Al (PH13–8Mo) process performance
- Some application problems of stainless steel in the pharmaceutical industry
- Greenhouse mechanical properties of chromium-nickel austenitic stainless steel 00Cr18Ni14Mo2Cu2
- 0Cr17Ni7Al(17–7PH) Fatigue and Fracture Toughness
Recent Updates
- Chip shape and control of stainless steel chip breaking drill
- stainless steel high temperature alloy
- BS 1449/2-1983 Plate, sheet and strip Part 2: Mechanical properties of stainless and heat-resistant steel plate, sheet and strip
- DIN1654/5-1989 Technical delivery conditions of steel and stainless steel for cold heading and cold extrusion
- Stainless steel wire rod (GB/T4356-1984)
- Introduction to stainless steel
- super stainless steel
- Introduction of Stainless Steel Scrap in my country
- Stainless steel wire rod for welding (GB/T4241—1984)
- Brittle at 475°C
- The number and representation of stainless steel
- The role of chromium in stainless steel
- stainless steel logo
- Stainless steel production process
- A Brief History of Stainless Steel Development
- Stainless steel wire for cold upset forging (GB/T4232-1993)
Trending Keywords
Copyright © 2016 - 2024 by metal-knowledge.com. All rights reserved