Search results for keyword: bureau
GB/T 9788-1988 Dimensions, shape, weight and allowable deviation of hot-rolled unequal angle steel
GB/T 9788-1988 Hot Rolled Unequal Angles: Dimensions, Shape, Mass and Permissible Deviations
This standard applies to hot rolled unequal angles for use in structural engineering.
The size tolerance for dimensions such as width (tolerance for the range of ± 0.4 to ± 5 mm) and length shall be i......
1050 
Sophie
GB1591-1979 "Technical Conditions for Low Alloy Structural Steels"
Low Alloy Structural Steel Technical Conditions GB 1591-1979 Introduction The formulation and promulgation of GB 1591—1979 “Low Alloy Structural Steel Technical Conditions” is mainly to promote the development and use of steel structures with excellent performances in our country. GB 1591—1979 ......
GB1591-1988 "Low Alloy Structural Steel"
Low Alloy Structural Steel GB1591-1988
Low alloy structural steel, also known as HSLA, is a type of steel alloyed with a small amount of elements such as nickel, chromium, and molybdenum that provide enhanced structural properties such as hardness and corrosion resistance. Low alloy steel can be ......
GB/T 222-1984 Sample sampling method for chemical analysis of steel and allowable deviation of chemical composition of finished product
GB/T 222-1984 specifies the sampling method for the chemical analysis of steel and the permissible deviations for chemical composition of finished products.
The purpose of this standard is to provide technical requirements for the sample method of chemical analysis of steel, and the permissible d......
Metal material laboratory uniform corrosion full immersion test method GB 10124-88
The Uniform Immersion Corrosion Test Method for Metal Materials in the Laboratory
The Uniform Immersion Corrosion Test Method for Metal Materials in the Laboratory is the most commonly used test method to investigate the corrosion resistance of metal materials. It is performed according to the pr......
Metal High Temperature Tensile Test Method GB 4338-84
Introduction
Metal high-temperature tensile testing is one of the most important tests used to measure metals mechanical response to applied stresses at elevated temperatures. The purpose of metal high-temperature tensile testing is to determine the influence of temperature on strength, ductility......
Alloy structural steel bars for steam turbine bolts (YB/T158-1999)
Turbine bolt alloy steel bar (YB/T158-1999) Introduction
Turbine bolt alloy steel bar, also known as turbine rotor head bolt steel bar, is an important material widely used in the power industry. It is mainly used as a connecting bolt in turbines, generators and other high-speed and heavy-duty ro......
High temperature tensile test method for metal pipes GB 3652-83
GB 3652–83
Metallic pipes are commonly used in industries ranging from construction and manufacturing to healthcare and automotive. As such, it is important that these pipes are fabricated and tested for compliance to safety standards. The GB 3652–83 standard is a national standard issued by th......
Metal bending test method GB232-88
The bending test of metal is a widely used test method in the field of metal shape and size control. It can be used to measure the load-bearing capacity, plastic deformation and springback of various metal materials. As an important detection method of metal materials, bending test has a certain i......
GB/T 13201--91 Technical Method for Establishing Local Air Pollutant Emission Standards
GB/T 13201--91 Technical Method for Establishing Local Atmospheric Pollutant Emission Standards
This paper focuses on the technical method formulated in the standard of GB/T 13201--91, designed to establish local atmospheric pollutant emission standards. This standard specifies the steps and proc......
Popular Entries
- Spanish heat-resistant steel steel grade
- Faults caused by incorrect mixing ratio of gasoline and engine oil
- How lifts work
- London Exchange Alternative Investment Market
- overseas trade
- Zibo Fushan Mining Co., Ltd.
- Zhangjiagang Rural Commercial Bank
- Brinell/Rockwell hardness conversion table
- thermodynamics thermodynamics
- ГOCT 5949-1975 Specifications for corrosion-resistant, heat-resistant and heat-strength steel bars and cold-worked products
- re-election workshop design
- employee satisfaction
- Density of diamond
- Rationalized Global Planning Model
- digital wallet
Recent Updates
- continuous casting
- ГOCT 5949-1975 Specifications for corrosion-resistant, heat-resistant and heat-strength steel bars and cold-worked products
- overseas trade
- shipping
- Korea Xinsheng Shipping Co., Ltd. Shanghai Office
- Hamilton's Protectionist Trade Doctrine
- Rationalized Global Planning Model
- Heckscher-Ohlin model
- black market price
- buy each other
- principle of reciprocal treatment
- The unit that accepts entrusted customs declaration
- reciprocal tariff
- sliding tariff
- digital wallet
- horizontal trade
Trending Keywords
Copyright © 2016 - 2024 by metal-knowledge.com. All rights reserved