1Cr13Mo stainless steel rod

1Cr13Mo stainless steel rod

1Cr13Mo is a type of stainless steel rod. It is a martensite stainless steel with a chromium content of 13%, and contains molybdenum and other alloying elements. This alloy is most commonly used in the production of surgical instruments, knives and shears. It is also widely used in fasteners, cutting tools and spring elements.

1Cr13Mo is a hard, corrosion-resistant material that is relatively easy to machine. This makes it suitable for a wide variety of applications. It also offers excellent wear resistance and is commonly used in applications that require frequent contact with corrosive materials, such as in food processing equipment.

1Cr13Mo stainless steel rod has a high yiel

AISI 410 (1Cr13Mo) stainless steel rod is a martensitic chromium-alloyed steel suitable for use in moderate corrosion environments. AISI 410 steel provides good corrosion resistance and strength at elevated temperatures coupled with reasonable ductility and toughness.

AISI 410 stainless steel rod is used in many applications such as fasteners, springs, aircraft engines, shafts and pumps. Its corrosion resistance is especially useful in more severe conditions. Its magnetic properties are also beneficial in a number of applications where a non-magnetic material is not suitable. AISI 410 stainless steel rod is also often used in structural applications and in the manufacture of surgical instruments.

AISI 410 stainless steel rod has a high chromium content providing it with excellent corrosion resistance. The microstructure of AISI 410 stainless steel rod consists primarily of martensite with a small amount of ferrite. The mechanical properties of AISI 410 stainless steel rod can be improved through further hardening treatments providing higher strength, greater ductility and improved wear resistance.

The chemical composition of AISI 410 stainless steel rod is as follows; carbon 0.08%, manganese 1.00%, silicon 0.40%, sulfur 0.03%, phosphorus 0.03%, chromium 12.00-14.00%, nickel 0.50%, molybdenum 0.75%, and nitrogen 0.10%. AISI 410 stainless steel rod has a melting point of approximately 1460-1475°C, a tensile strength of 500-1000N/mm², an ultimate elongation of 25-50%, and impact resistance of 30-50J/cm² at -20°C.

AISI 410 stainless steel rod can be readily machined and formed into a variety of shapes and sizes. It is particularly suitable for welding due to its ferritic grain structure, weldability and high ductility. AISI 410 stainless steel rods can be polished to a shiny finish and are resistant to scaling at high temperatures.

Overall, AISI 410 stainless steel rods are an excellent choice for a variety of applications and provide good corrosion resistance and strength, making them a popular choice among engineers and designers.