Y11Cr17 stainless steel rod

Introduction of X14CrMoS17 Austenitic Stainless Steel Bar

X14CrMoS17 is an austenitic chromium-molybdenum-nickel stainless steel with cr-mo-ni-cu-si-mn system, which contains higher chromium, molybdenum, nickel and higher carbon reflecting higher mechanical properties and corrosion resistance than other comparable stainless steels. The chemical composition of X14CrMoS17 is shown below.

Chemical Composition:

C: 0.05-0.12

Si: <1.50

Mn: <1.50

Cr: 17.0-19.00

Mo: 0.80-1.25

S: 0.03

Ni: >9.50

Cu: 0.50

P: 0.045

The physical and mechanical properties of X14CrMoS17 are high due to its high chromium, molybdenum, nickel and carbon contents. Its yield strength ranges from 450 to 650MPa depending on the manufacturing and delivery condition and its softening temperature is higher than that of other similar stainless steels. Its impact toughness is also higher than that of other similar stainless steels, making it the top choice for most demanding applications. The oxidation resistance of X14CrMoS17 is also quite good, and it is commonly used in industrial applications that require a high level of oxidation resistance.

Applications of X14CrMoS17 Austenitic Stainless Steel Bar

X14CrMoS17 bar has been widely used in industrial applications due to its superior performance and long-term durability. X14CrMoS17 bar is often used in:

Heat Treatment: X14CrMoS17 bar is often used in heat treatment applications such as quenching and tempering, annealing, normalizing, solution treatment and surface treatment. The high chromium, molybdenum and nickel content helps the bar to resist deformation and maintain its superior performance during the heat treatment.

Transportation: X14CrMoS17 is also often used in transportation applications such as automobile and aerospace parts. Its high tensile strength and fatigue limit make it an ideal material for auto parts and aircraft applications.

Oil and Gas Industries: X14CrMoS17 is also often used in oil and gas production due to its high corrosion resistance, good strength and toughness properties.

Construction and Architecture: X14CrMoS17 is also used in construction and architecture due to its durability and aesthetic appeal. Its high corrosion resistance and excellent machinability make it an ideal choice for use in architectural designs.

Conclusion

X14CrMoS17 is an austenitic chromium-molybdenum-nickel stainless steel bar with cr-mo-ni-cu-si-mn system that has high mechanical properties and corrosion resistance. It is highly suitable for applications that require high strength, durability and corrosion resistance such as heat treatment, transportation, oil and gas production, and construction and architecture. With its superior performance and long-term durability, X14CrMoS17 bar is perfect for a variety of industrial applications.

AISI 420 stainless steel rod (chemical symbol: AISI420, also known as X46Cr13, 1.4021, EN standard X20Cr13) is a martensitic stainless steel with a certain amount of wear resistance and corrosion resistance.

AISI420 stainless steel rod is a kind of martensitic stainless steel containing manganese, nickel and chromium. It has good hardness and good corrosion resistance in mild environment. The addition of manganese and nickel increases the strength and hardness of the steel. Adding molybdenum can improve its corrosion resistance.

Due to its high wear resistance and corrosion resistance, AISI420 stainless steel rod can be used to produce many products, such as medical tools, kitchen products, knives, scissors, bearings and so on.

AISI420 stainless steel rod has very low machinability and is difficult to work with. Its cutting performance can be improved by proper heat treatment. Its best heat treatment condition is 1010-1120℃ preheating, followed by rapid cooling and annealing.

AISI420 stainless steel rod is non-magnetic in annealed state, but it can be slightly magnetized in cold working state. In addition, its corrosion resistance to weak organic acid and acid salt solution is better than AISI416.

AISI420 stainless steel rod has excellent wear resistance and corrosion resistance. Products made of it can be used in the manufacture of medical tools, kitchen products, knives, scissors, bearings and other industrial components. But due to its low machinability, it is not easy to work with. Therefore, it is important that proper heat treatment is required to improve its cutting performance.