Introduction
A rebar bundle machine is a machine used for bundling and strapping together steel, iron and other building materials. It is an important equipment for steel bar processing in steel bar processing plants and steel selling centers.
The rebar bundle machine generally includes a machine frame, a wire rod feeding device, a winding wheel, a guide wheel, a tensioning device, a tying device, a binding wheel, a cutting device, a main drive, and a control system. The following is a detailed introduction to the structure and components of the rebar bundle machine.
Machine Frame
The machine frame is a support member for the other components of the rebar bundle machine. The upper part of the machine frame is generally made of cast iron or section steel. The lower part of the machine frame is attached with a wheel or roller, which facilitates the placement and movement of the machine.
Wire rod feeding device
The wire rod feeding device is used to place the wire rod in the machine. The feeding device generally consists of a feeding platform, wheel, motor, etc. The wheel is driven by the motor to rotate, thereby controlling the feeding speed of the wire rod.
Winding wheel
The winding wheel is the component that combines the wire rod with the tie. The winding wheel is generally composed of a wheel and a motor. The wheel is driven to rotate by the motor, and the wire rod is wound on the wheel by the combined tie.
Guide wheel
The guide wheel is used to guide the tie and the wire rod to rotate with the wheel. The guide wheel is driven by the motor to drive the wheel to rotate, and then the wire rod and the tie are guided to rotate with the wheel.
Tensioning device
The tensioning device is used to adjust the tension of the wire rod. The tensioning device can adjust the tension according to the tension requirement of the wire rod, which plays an important role in ensuring the quality of the wire rod.
Tying device
The tying device is used to tie the binding wheel. The tying device generally consists of a hook, a block and a motor. The hook is driven by the motor to rotate, and then the hook is used to tie the binding wheel to realize the binding and strapping of the wire rod.
Binding wheel
The binding wheel is used to tighten the wire rod. The binding wheel is generally composed of a wheel and a motor. The wheel is driven to rotate by the motor, so that the wire rod can be tightly bound and strapped.
Cutting device
The cutting device is used to cut the steel rod and the tie after it is bound and strapped. The cutting device generally consists of a cutter head and a motor. The cutter head is driven by the motor to rotate, and then the steel rod and the tie can be cut off.
Main drive
The main drive is the main component of the rebar bundle machine. The main drive has the function of driving the various components to rotate and operate, and is generally composed of two parts: the motor and the transmission system.
Control System
The control system is used to control the rebar bundle machine. The control system generally includes a control panel, a controller, and a switch. The control panel controls the operation of the rebar bundle machine, the controller is responsible for adjusting the speed of the machine, and the switch is used to control the switch on and off of the machine.
Conclusion
The rebar bundle machine is an important equipment for steel bar processing in steel bar processing plants and steel selling centers. It is mainly composed of a machine frame, a wire rod feeding device, a winding wheel, a guide wheel, a tensioning device, a tying device, a binding wheel, a cutting device, a main drive and a control system. This structure ensures that the rebar bundle machine can complete the binding and strapping of the wire rod.
