The Basics of Operating Automatic Edge-Cutting Machine
Automatic edge-cutting machines are used for cutting and edging in the fabric industry. The tool operates by using a rotating blade with a cutting surface on a lower body and an inverting rotary cutting device to trim fabric with precision. It is rapid and accurate in its operation and does not require significant electrical or manual power. The following instructions should be followed for the successful operation of an Automatic Edge-Cutting Machine.
Safety & Protection
Before operating the edge-cutting machine, the operator must ensure that all safety guards and switches are in working order. In addition, the operator must check that the cutting blades are sharp and in good condition. Working with a dull knife or with an open edge may cause injury or cause a serious safety hazard. Protective clothing is to be worn including safety glasses and a protective face mask.
Set Up the Machine
The machine should be located on a flat, level surface. It should be firmly clamped or bolted to the floor or workbench. Make sure the cutting blade is sharp and in good condition. Then check that the belt is properly tensioned and the unit is in proper alignment with free movement of the cutting blade.
Operate the Machine
When the machine is properly set up and all safety measures have been taken, the operator can now commence using the machine. The edge-cutting machine functions by the rotation of the cutting blade at the lower body end. However, before making contact with the material, the operator must ensure that the blade is properly aligned. To do this, the operator must push the cutting blade against the material and align the blade to the desired width of the material to be cut. Once this is done, the operator can then begin to move the fabric material along the cutting edge. The operator should always push the material in a straight motion, as angled pushing may cause damage to the material and the machine.
During the operation, the operator should always monitor the progress of the cutting blade. The operator should also be careful to ensure that the cutting blade does not break or tear any of the fabric as this could lead to damage or injury.
Cleaning and Maintenance
It is important to properly care for the machine and keep it in good working order. To ensure that the machine operates properly, the operator should clean and inspect the belt and the cutting blade regularly. Any wear or damage should be noted and repaired as necessary. In addition, the cutting blade should be sharpened periodically to ensure that it operates at maximum efficiency.
Conclusion
The Automatic Edge-Cutting Machine is a very useful and reliable tool in the fabric industry. It is efficient and accurate in its operation, and it does not require a great amount of manual or electrical power. With proper usage and maintenance, this machine can provide years of excellent service. By following the instructions outlined above, the operator can enjoy a safe and successful operation of the Automatic Edge-Cutting Machine.
