Checkered steel plate (GB/T3277-1991)

hot rolled coil 27 24/06/2023 1104 Alexis

Introduction Chequered steel plate is a kind of structure steel produced by hot rolling type and cold rolling type hot rolled chequered steel plate includes 4.5mm, 6.0mm, 8.0mm,and 10mm thickness. Chequered steel plate can be divided into gas shield welding chequered plate and submerged arc weld......

Introduction

Chequered steel plate is a kind of structure steel produced by hot rolling type and cold rolling type hot rolled chequered steel plate includes 4.5mm, 6.0mm, 8.0mm,and 10mm thickness. Chequered steel plate can be divided into gas shield welding chequered plate and submerged arc welding chequered plate according to process. Hot rolled chequered steel plate is mainly for high strength flat steel (hot rolled coil) of ordinary low quality carbon structural steel and low alloy steel, including ordinary steel (Q235), low alloy high strength steel (Q345), cold rolled steel coil or hot rolled coil or hot-rolled orientation, cold rolled or cold -rolled orientation.

1. Steel Grade and Standard

Chequered steel plate is according to GB/T3277-1991 standard. Among them, the low carbon steel plate of GB/T3277-1991 with thickness less than or equal to 4.5mm, the extra high strength steel plate of GB/T3277-1991 with thickness less than or equal to 10mm belong to its material.

2. Manufacturing Process

The manufacturing process of chequered steel plate usually consists of two stages: hot rolling and cold rolling. After hot rolling, a certain thickness of raw material is put on the cold roller. The pressure between the two rollers presses the steel plate into a predetermined thickness. After cold rolling, the checkered steel plate will be formed.

3. Features and Use

Chequered steel plates are usually used in construction, mechanical structure, automobile, shipbuilding, railway and bridge engineering, bridge, crane and other manufacturing operations.

Chequered steel plate has the advantages of high strength, good toughness, good weldability, uniformity and good plasticity. It also has the advantages of high strength, good toughness, good weldability, uniformity, good plasticity and good wear resistance. It has good seismic performance and is widely used in construction, bridges, tanks and other projects and equipment structures.

4. Characteristic

The chequered steel plate has honeycomb, waved, diamond and so on types. Its characteristics are anti-skid and decoration. The anti-skid effect of chequered steel plate can reduce the transportation cost and manual labor cost, improve the transportation efficiency and reduce the cost of vehicle installation and tires.

Conclusion

In conclusion, chequered steel plate is a kind of structure steel produced by hot rolling and cold rolling. It has the advantages of high strength, good toughness, good weldability, uniformity and good plasticity. It is widely used in construction, bridges, tanks and other projects and equipment structures due to its good seismic performance. The chequered steel plate has a honeycomb, waved, diamond and other types, with the characteristics of anti-skid and decoration.

Put Away Put Away
Expand Expand
hot rolled coil 27 2023-06-24 1104 AuroraDreams

wavy pattern steel plate (GB/T3277-1991) Wavy pattern steel plate, also known as wavy checkered plate, is a kind of steel plate with a wavy pattern raised on the surface. It is mainly used as decoration and anti-skid panel in various industries. In general, wavy pattern steel plates are made of ......

wavy pattern steel plate (GB/T3277-1991)

Wavy pattern steel plate, also known as wavy checkered plate, is a kind of steel plate with a wavy pattern raised on the surface. It is mainly used as decoration and anti-skid panel in various industries.

In general, wavy pattern steel plates are made of ordinary low carbon steel. Carbon content of the material can be made between 0.08% to 0.25%. The commonly used steel grades are Q195, Q235, Q345, etc. In addition, stainless steel can also be used for processing.

Specification of wavy pattern steel plate is GB/T3277-1991 standard, and it is divided into two types: one is wavy pattern inclined tooth type and the other is wavy pattern herringbone type. The symmetrical wave pattern has a sideband width of 5-45mm; wave depth of 0.5-5mm; wave angle of 10-50° ; waved angle of 2-10°. And the surface has three finishing treatment: Un-oiled, Oiled treatment and water surface treatment, to meet different requirements of customers.

Besides, wavy pattern steel plates are not only light in weight and good in rigidity, but also strong in tension, bending and shear, and they have become an important component in many industries such as stairs, balconies, decorations and so on.

Generally speaking, wavy pattern steel plates are widely applied in various areas due to their good processability and excellent performance.

Put Away
Expand

Commenta

Please surf the Internet in a civilized manner, speak rationally and abide by relevant regulations.
Featured Entries
engineering steel
13/06/2023
low alloy steel
13/06/2023
two stage bidding
03/07/2023
slip
13/06/2023