Operating Instructions for CNC Multi-Axis Semi-Automatic Lathe
I. Introduction
This Operating Instructions is a guide for the use of CNC Multi-Axis Semi-Automatic Lathe. By following these instructions, the user will easily find the way to use this heavy machine safely and efficiently.
II. Safety Precautions
1. Wear Protective Equipment: When operating CNC Multi-Axis Semi-Automatic Lathe,wear protective equipment, such as hearing protection, safety glasses, and heavy-duty gloves.
2. Follow Instructions: Read the instructions carefully before operating.Know the operation before using this machinery.
3. Maintain Regular Maintenance: Regularly maintain the machine to ensure its efficient operation;
4. Disconnect Power Source: Before cleaning or performing any maintenance, disconnect the power source and close the water supply valve.
5. Resolved Issues: Do not operate the machine if there are unresolved issues.
III. Set Up
1. Tool Setup: Ensure that all tools are firmly fastened and correctly set up before operation. Insert, fix and secure the tool into the tool holder following all instructions that are supplied with the tool.
2. Router Setup: Set up the router and attach the required router accessories following the instructions that are provided with the router.
3. Control Setup: Set up the system control by connecting the interface cable and power cable.
4. Power Up: Turn on the power supply following the instructions and review the automatic control settings.
5. Start Up the Program: Load the program into the system and start it up with the automatic sequence.
IV. Operation
1. Operator Personnel: Only authorized and trained personnel should operate the machine and the machine should be easily accessible to the operators at all times.
2. Tool Maintenance: Inspect the tool holder and ensure that the tool is in good condition before starting the operation.
3. Operation Speed Control: Control the speed of the machine with the speed control knob and do not exceed the maximum speed of the machine.
4. Feeding Control: Control the feed of the machine with the manual control knob and do not exceed the maximum feed rate of the machine.
5. Feeding Depth Control: Control the depth of the tool by setting the depth control knob.
6. Surface Finish: The surface finish results of the machine will depend on the setting of the programming and the parameters chosen.
7. Tool Replacement: When replacing a tool, follow the instructions provided and make sure to securely fasten the new tool.
V. Maintenance
1. Regular Maintenance: Regularly inspect and maintain the machine, clean the components and immediately replace broken or worn parts to ensure the efficiency, safety and effective operation of the machine.
2. Lubrication: Regularly lubricate exposed parts of the machine and all moving parts to maintain the machines efficient operation;
3. Care: Take care to keep the machine whirling, jogging, and knurling clean.
VI. Conclusion
This Operating Manual for CNC Multi-Axis Semi-Automatic Lathe is designed to provide a comprehensive and detailed guide for the safe and efficient operation of the machine. By following these instructions, operator personnel will be able to safely and effectively use this heavy-duty machine.
