，这是不可能的，但是你可以查找一些相关的模具工程词汇列表。下面是一些常用的模具工程词汇：
Mold Base: The framework of a mold, composed of different steel plates, used to assemble the mold parts into a single mold.
Cavity: The part of the mold where the molten plastic or metal is injected and formed into the desired shape.
Runner System: The system used to move the plastic or metal from the injection nozzle to the mold cavity.
Sprue: The opening through which the plastic or metal flows from the injection nozzle to the runner system.
Cooling System: The system which is used to cool down the plastic or metal after it is injected into the mold cavity.
Ejection System: The system which is used to eject the finished part out of the mold cavity.
Molding Process: The process by which plastic or metal is heated to its molten state and then injected into the mold cavity to form the desired shape.
Material: The type of plastic or metal used in the molding process.
Gating System: The system by which the plastic or metal is introduced into the mold.
Melt Temperature: The temperature at which the plastic or metal is heated prior to being injected into the mold.
Venting: The process of allowing the mold to draw out air from the mold cavity before the plastic or metal is injected.
Ejector Pins: The pins which are used to push the finished part out of the mold cavity.
Mold Flow Analysis: The process by which the flow of the plastic or metal through the different sections of the mold is studied.
Mold Release Agent: The material used on the surface of the mold cavity to prevent the plastic or metal from sticking to the mold surface.
Parting Line: The line between where the two halves of the mold come together.
Crossections: The sections of the plastic or metal which are cut to analyze its internal structure.
Draft: The angle on the sides of the mold which allows the part to be easily ejected from the mold.
