Safety measures for bearing inspection of power machinery
In order to ensure the safety of mechanical operation, the bearing inspection of power machinery plays an important role in checking and maintaining the machinery. In order to ensure the safe and reliable operation of machinery, it is necessary to carry out regular maintenance work on these bearings, and pay attention to some points in the process of bearing inspection to ensure the safety of bearing inspection.
Firstly, during the inspection of bearings, the situation such as overheating and vibration should be noticed. It is necessary to confirm whether the temperature of bearing is increased or the bearing has vibration marks after stopping the machine. If necessary, the temperature should be measured by thermometer to understand the temperature situation. Secondly, for bearing that needs to be added with oil or grease during operation, it is necessary to pay attention to whether there is any oil or grease leakage during bearing inspection. If necessary, the bearing should be disassembled and inspected. Thirdly, when cleaning the bearing during inspection, it is necessary to pay attention to pay attention to the effect of cleaning solvent and the cleaning of bearing groove. Choose the solvent suitable for bearing cleaning carefully. And clean the bearing surface and bearing groove. Fourthly, after adjusting the clearance between the shaft and the bearing during the measurement of bearing clearance, the bearing should be aligned correctly and the clearance between the bearing and the axle should be adjusted again before installation. Then the bearing can be installed correctly.
In addition, the workers participating in bearing inspection should also wear protective equipment and pay attention to the correctness of the tightening torque of fastening screws. Do not over tighten the fastening screws to prevent the bearing from being deformed. It is also necessary to pay attention to the installation direction of the bearing and mark it. The bearing must be installed in a correct direction during the installation process.
In the process of bearing inspection of power machinery, there are some safety issues that need attention. It is necessary to ensure the safety of bearing inspection。 Firstly, check whether the equipment is safe and reliable before inspection. Secondly, carry out the bearing inspection according to the relevant regulations. Thirdly, wear protective equipment when inspecting the bearing. Fourthly, pay attention to the temperature, lubricant and other conditions during bearing inspection. Fifthly, understand and use the relevant tools correctly, so as to prevent unnecessary damage to the bearing during the inspection.
Safety should always be the top priority of bearing inspection of power machinery, and all inspection staff should obey the relevant rules and regulations and pay attention to their own safety. Bearings are an important part of the machinery, and attention must be paid to the safety of bearing inspection to ensure the safe and effective operation of the machinery.
