Solution to Manual Pump Oil Filling Device Pumping Oil Problem
Introduction
Manual pump oil filling device is widely used in many industries, such as oil and gas and automotive. While they help make processes faster and smoother, they are also prone to problems. One such problem is the inability of the manual pump to pump oil. In such a situation, the manual pump not only stops working but also leads to a lot of time and money wastage. This article discusses the possible causes of the problem and the possible solutions.
Causes
The causes for the inability of the manual pump to pump oil can be both internal and external. Some of the possible causes are:
1. Blockage of intake pipe: The intake pipe, which is used to transfer the oil from the storage tank to the pump, can get blocked due to foreign objects, such as dirt and debris, or due to the accumulation of oil residues.
2. Broken seal: The seals around the pump can become loose or broken due to wear and tear, or due to improper handling. This can lead to the leakage of oil and the subsequent stopping of the pump.
3. Leaking oil relief valve: The oil relief valve, which is used to regulate the pressure of the pump, can become worn or damaged over time and this can lead to the loss of pressure and the inability of the pump to pump oil.
4. Low oil level: The oil level in the tank can be too low, due to inadequate refilling, leading to the pump not functioning properly.
Solutions
There are several solutions for the inability of the manual pump to pump oil.
1. Inspect the intake pipe: The first step should be to inspect the intake pipe for any blockages or foreign objects that may be causing the problem. If any such objects are found, they should be removed immediately.
2. Replace or tighten the seal: If the seal around the pump is found to be worn or loose, it should be replaced or tightened to ensure that there are no leaks and that the pump is able to pump oil properly.
3. Clean the oil relief valve: The oil relief valve should be inspected and cleaned regularly to ensure that it is operating properly and that it is not leaking.
4. Check the oil level: The oil level in the tank should be checked periodically to ensure that it is not too low. The tank should be refilled regularly to prevent the pump from not working properly due to inadequate oil.
Conclusion
Manual pump oil filling devices are prone to problems, such as the inability of the pump to pump oil. This problem can be caused by a number of factors, such as blockage of the intake pipe, broken seals, leaking oil relief valve, and low oil levels. There are several solutions for the problem, such as inspecting the intake pipe, replacing or tightening the seals, cleaning the oil relief valves, and checking the oil levels. By following these solutions, it is possible to ensure that the manual pump is able to function properly.
