Working Principle of Using a Flanking Gun to Measure Liquid Level
The principle of using a flanking gun to measure the liquid level in a melting pot is relatively simple. Generally, it is composed of three main components, namely a barrel, a fuel line, and a control valve. The barrel of the flanking gun can typically be filled with some sort of fluid, such as gas, water, or an appropriate liquid depending on the application. The fuel line will then run from the barrel of the gun to the control valve and finally to the melting pot.
When the control valve is opened, the fuel enters the barrel of the gun and is ignited by a spark plug, resulting in a rather small but intense flame. Due to the pressure created by the fuel and the spark, the flame is propelled out of the barrel of the gun, creating a rather large and intense flame. This flame will then be utilized to gauge the liquid level in the melting pot by producing a reference point for the actual liquid level measurement.
To measure the liquid level, the flanking gun should be held vertically above the melting pot and the control valve should be opened. Then, the gun should be aimed in such a way so that the intense flame is projected directly onto the surface of the liquid. While the flame is on the surface of the liquid, the level should be carefully read using the guns sight. Then, the control valve can be adjusted slightly to increase or decrease the flame and the level should be read again.
The flanking gun will then be used to measure the liquid level over the duration of multiple readings until the precise level has been located. The gun can be used to measure the liquid level in both small and large melting pots. The accuracy of the level measurement technique depends on the size of the melting pot, the accuracy of the gun, and the level of precision required.
In addition to being used to measure the liquid level in a melting pot, the flanking gun can also be used to measure the temperature of the liquid. Generally, the temperature measurement is done by adjusting the control valve to higher pressures and then projecting the flame onto the surface of the liquid. The temperature will then be read using an appropriate thermometer. It is important to note that the safety of anyone using the flanking gun should always be taken seriously and the gun should be used in accordance with the necessary safety protocols and procedures.
Overall, the use of a flanking gun to measure the liquid level in a melting pot is relatively simple and straightforward. By following the procedure outlined above and with the appropriate equipment, safe and reliable measurements can be taken in no time at all. With its simplistic design, the flanking gun is an invaluable tool for any engineer looking to precisely measure the level of liquid in a melting pot.
