Analysis on Fracture of Submersible Pump Clamp
Submersible pump clamp is an important part of mining machinery, mainly used to ensure the normal operation of mining machinery. The fracture of the submersible pump clamp will cause a lot of trouble on the mining machinery and bring great losses to the mining process. The following will analyze the reasons for the fracture of the submersible pump clamp.
First of all, during the installation process of the submersible pump clamp, if the installation personnel are not professional enough and make incorrect operations, the clamp coupling pressure is too small, or the mounting surface quality is not qualified, then this will cause the submersible pump clamp to be prone to fracture failure. At the same time, inadequate materials, the hardness of the submersible pump clamp is not tight enough, the surface of the clamp is cracked and other factors will cause the clamp to break.
In addition, improper use or maintenance of the submersible pump clamp can also cause it to fracture. This is mainly due to the overloading of the submersible pump clamp, or because of the long-term operation time of the submersible pump clamp, the service life is exceeded, and it is easy to cause fracture failure.
Therefore, in order to effectively prevent the fracture of the submersible pump clamp, it is necessary to strengthen the supervision during the installation process, and strictly control the installation quality. At the same time, the hardness must be tested strictly when choosing the materials of the submersible pump clamp to ensure that the clamp won’t be easily broken. Besides, the submersible pump must be used and maintained properly, and the submersible pump clamp must be inspected regularly to ensure that it is intact and can hold pressure.
In summary, when using the submersible pump clamp correctly, it can play a good role in supporting the normal operation of the mining equipment. However, if it is not installed correctly, or if it is not maintained properly, it will easily lead to fracture failure and cause the mining equipment to fail. Therefore, it is necessary to strengthening the design, selection and installation of the submersible pump clamp. At the same time, we should pay attention to the maintenance and maintenance of the pump clamp, in order to make use of it effectively.
