Debugging of Automation Instruments System for Electric Furnace Steelmaking
Electric furnace steelmaking is an important part of steel production. The automation instrumentation system is an indispensable part of this process. It is mainly used to measure, control and regulata the parameters of electric furnace steelmaking, such as temperature, pressure, flow rate, etc., so as to maintain the quality of molten steel and make the whole process more efficient and safe. The debugging of the automation instrumentation system is a very important work in the whole steelmaking process.
In the debugging of the automation instrumentation system, the first step is to make a comprehensive investigation of the whole system, including the structure, composition, parameters, functions and other aspects. Through these investigations, the technician can better understand the performance and characteristics of the whole system and make the debugging plan reasonably. After that, according to the basic principles of the system, technicians should set up the parameters of each instrument reasonably and accurately, so as to ensure that the system can work stably and reliably. In the debugging process, technicians must be highly concentrated and strictly guided by the debugging requirements in order to ensure that all instruments are installed in the correct position and in accordance with the correct wiring.
At the same time, technicians should also be responsible for the pre-test and trial operation of each instrument. During the pre-test, technicians should do a comprehensive and close inspection of each instrument, and configure the corresponding parameters of each instrument in the pre-test process, so as to confirm whether the configuration parameters meet the requirements. Finally, after the pre-test is passed, the system can successfully enter the trial operation stage. During the trial operation, technicians should pay attention to the change of each parameter value in order to keep the real-time, reliable and stable operation of the system.
In the debugging of the automation instrumentation system, there are many operating steps, and the debugging process is both a serious and a meticulous work. Therefore, for the debugging process, it is necessary to strictly implement the debugging operation according to the requirements of the technical regulations and standard operating procedures, and to strictly follow the debugging process in order to ensure that the system can work stably and reliably.
