Introduction
Rolling mill is a kind of important machine for processing metal strips. It is widely used in iron and steel industry, nonferrous metal processing industry, etc. In this paper, the technical parameters of horizontal rolling mill are introduced in detail.
Working Principle
The horizontal rolling mill is composed of two horizontal cylindrical rolls, which are arranged horizontally in the working frame. The material is loaded into the entrance of the horizontal rolling mill, then through the pressing of the two rolls, the materials will be compressed, folded and extruded, until reaching the desired thickness.
Technical Parameters
1. The maximum thickness of material is 1-40mm;
2. The maximum width of material is 600-3000mm;
3. The minimum rolling speed of the material is 0.1-15 m/min;
4. The parallelism tolerance of the grinding surface is +0.02-0.15mm;
5. The surface roughness of the grinding surface can reach Ra0.1mm;
6. The finished product can be supplied in coil material, cold-rolled strip, or hot-rolled strip;
7. The temperature control is automatic control, which can realize rapid cooling and uniform temperature distribution of the whole material.
Conclusion
The above is the introduction of the technical parameters of the horizontal rolling mill. The horizontal rolling mill has good stability and reliability, high accuracy, good surface quality and can meet the needs of different materials. It is an important equipment for the metal processing industry.
