Introduction
Installing a stainless steel chimney is an important step in protecting the home from smoke and other hazardous materials entering the home while also allowing fresh air to enter the home. It is important to choose the correct size and type of stainless steel chimney based on the type of stove being installed. There are advantages and disadvantages to each stainless steel chimney and following the proper steps when installing them will ensure a successful installation.
Types Of Stainless Steel Chimneys
When it comes to stainless steel, there are several different types to choose from. The most popular types are the double walled, flex pipe, direct vent, and rectangular type. Double walled stainless steel chimneys are generally used for wood burning stoves and come with two separate layers of stainless steel. Flexible pipe chimneys are also popular, as they do not require support and prevent drafts. Direct vent chimneys use direct connection between the stove and the chimney and are very helpful in controlling heat. Rectangular chimneys are ideal for larger openings and require very little maintenance.
Installing An Stainless Steel Chimney
When installing a stainless steel chimney, it is important to use the appropriate size and type of chimney for the application. When determining the size of the stainless steel chimney, it is important to consider the type of stove being installed and the size of the opening. If installing a direct vent chimney, the area for the connection between the chimney and the stove should be measured carefully. Once the size of the chimney has been determined, it is important to match the connector and elbow pieces to fit the particular type of stainless steel chimney being installed.
Once the correct size and type of stainless steel chimney has been determined, it is important to install the chimney properly. Each type of stainless steel chimney requires different installation steps, but generally, a stainless steel chimney should be properly attached to the roof, with the appropriate support and sealant to prevent leaks and drafts. Additionally, the steel piping should be secured to the chimney using bolts, screws, and appropriate fittings. Finally, it is important to test the chimney before use to ensure proper operation.
Conclusion
Installing a stainless steel chimney is an important step in preventing smoke and other hazardous materials from entering the home and allowing fresh air to enter. It is important to choose the correct size and type of stainless steel chimney for the specific application and use the appropriate installation steps when installing the chimney. Following these steps will ensure a successful installation and the enjoyment of a smoke free home.
