Spring Farm Machinery Eradicating Disease Six Techniques
As the temperature rises, spring farming activities have become increasingly active. In this time of peak demand for farm machinery, operators must not only check the health condition of the machines in time, but also take specific measures to prevent and control common diseases of farm machinery. So what are the six ways to eradicate disease from farm machinery in the spring?
The first thing to note is that it is necessary to pay attention to protection. When the farm machinery is put into operation, in order to ensure the service life of various parts, operators should pay attention to protecting them in their daily work and operation, especially the parts that are prone to wear such as the transmission parts should be inspected and maintained regularly. Pay attention to the fuel, oil and water entering the machine, so that no foreign objects enter the engine and cause mechanical damage.
Second, pay attention to lubrication. Farm machinery needs to timely lubricate the parts to reduce the wear of the machine and maintain the normal operation of the machine parts. Lubrication should be carried out at regular intervals according to the operation and use of the machine, so as to prevent mechanical faults, macular wear or rust, and ensure the normal operation of the machine.
Third, regularly check the fuel system of farm machinery. If the fuel supply system is not clean enough, it will inevitably cause clogging in the injector, and the performance of the engine will be weakened. At the same time, the fuel should be kept clean and the fuel filter element should be replaced in time.
Fourth, pay attention to the maintenance of the electrical system. Farm machinery needs to be operated stably, so the electrical system of the machine must be properly maintained, especially the battery. A good battery can provide power for the machine and check the tightness of the battery terminals to ensure that it can provide sufficient current.
Fifth, pay attention to clearing up dead angles. Various piping and cables of farm machinery are usually easy to wear at some dead angles. Operators should check and handle these places regularly to ensure the stable operation of the machine.
Last but not least, it is important to carefully maintain the tires. The tires of farm machinery are very important components. Regularly measure the pressure of the tires, and replace the worn ones in time, so as to ensure that the tires have good grip and have good anti-skipping performance, so that the machine can be used in the muddy and slippery parts of the field.
In short, operators of farm machinery need to pay attention to protection, lubrication, fuel system, electrical system, dead Angle clearance, and tire maintenance to ensure the healthy and normal operation of farm machinery in spring farming activities.
