Electro-Thermal Riveting Machine Technical Parameters
1. Working voltage: 380V/50Hz
2. External dimensions of machine: 500mm x 450mm x 200mm
3. Weight of machine: approximately 37KG
4. Maximum riveting force: 5KN
5. Riveting distance: 0-50mm (adjustable)
6. Control system: Advanced single-chip microcomputer control
7. Work mode: Pneumatic type
8. Control accuracy: 0.1mm
9. Machine speed: 0-150 RPM
10. Safety protection device: If the machine overloaded and the pressure is too high, the protection system will shut down the machine.
11. Riveting force adjustment range: 0.1-5KG
12. Mode of cooling: air-cooling
13. Working efficiency: 0.2-1.8 times/min
14. Working range: riveting of aluminum, copper, stainless and carbon steel materials
15. Environmental conditions:
Operating temperature: -10~45℃
Humidity: <= 85%RH
Atmospheric pressure: 90-106Kpa
16. Meterial of rivets: aluminum, copper, stainless and carbon steel
17. Rivet diameter: Ø2.5-5.5mm
18. Riveting speed: 0.5-5 seconds
19. Noise figure: <60dB
20. Service life: 80000-100000 times
The electro-thermal riveting machine is widely used in the automotive, aerospace and other industries for riveting process of aluminum, copper, stainless and carbon steel materials. It uses an advanced single-chip microcomputer to control the working process, which can greatly reduce the error and increase the efficiency. The machine also equipped with an over-pressure protection device which can protect the machines from overload and ensure the safety in work. The machine is equipped with adjustable speed, adjustable pressure and other features, and the riveting speed is 0.5-5 seconds, that make the users can adjust the machine according to different materials and different work requirements. The rivet diameter can reach Ø2.5-5.5mm and the service life of the machine is up to 80000-100000 times. The machine has small size and its convenient for use in various production lines.
