Operation Procedure for Cleaning the Muzzle of Rolling Cylinder
The muzzle of the rolling cylinder should be cleaned regularly to ensure that the performance and life of the rolling cylinder can reach a better level. Here are the operating procedures for cleaning the muzzle of the rolling cylinder:
1. Prepare tools and materials. Before cleaning the muzzle of the rolling cylinder, you need to prepare some tools and materials to facilitate the cleaning process. Select the appropriate cleaning tools according to the material and structure of the muzzle, such as steel wire brush, steel wire needle, wool felt, etc. In addition to a variety of cleaning tools, you also need to prepare some cleaning fluids, such as detergent and rust remover.
2. Remove the scale on the gun muzzle. It is necessary to remove the scale on the gun muzzle before cleaning the gun muzzle. It is recommended to use an electric grinding instrument to remove scale. Normally, a steel wire brush or steel wire needle should be selected to remove scale. After removing the scale, remove the dust created by the scraper and prepare for the next step.
3. Clean the gun muzzle. Clean the surface of the gun muzzle with a damp cloth soaked in a cleaning agent. If the dirt is very stubborn, it is recommended to use a steel brush to scrub it. Note that if the steel brush is too rough, it may cause scratches on the surface of the gun muzzle and cause damage, so it is necessary to adjust the steel brush to a proper softness.
4. Clean the rust on the gun muzzle. If there is rust on the surface of the gun muzzle, it should be cleaned with rust remover. First, dry the surface of the gun muzzle, then apply the rust remover evenly to the rusty area, wait a few minutes, and then use a steel brush to scrub the surface. After scrubbing, use water to rinse the rust remover and allow the gun muzzle to dry.
5. Wipe and lubricate. After cleaning the gun muzzle, use a dry cloth to wipe the surface of the gun muzzle and lubricate with lubricant. This is to protect the gun muzzle from rust, which can prevent the surface of the gun muzzle from being corroded by rust in the future, so as to ensure the normal use of the gun muzzle.
In short, the above is the cleaning procedure for the muzzle of the rolling cylinder. It is necessary to carry out regular cleaning of the muzzle of the rolling cylinder, which can not only ensure the normal use of the rolling cylinder, but also extend the service life of the rolling cylinder. In the process of cleaning, please be careful and try to avoid damaging the surface of the muzzle.
