Installation of Aluminum Wire Billet Continuous Casting and Rolling Machine
Casting-rolling production line is the production process of casting and rolling, which will improve the production efficiency and reduce the loss of materials. Nowadays, the environment-friendly production mode is implemented, so the casting and rolling production line powered by electric energy is welcomed by many manufacturers. The Electric Aluminum Wire Billet Continuous Casting and Rolling Machine has the features of high efficiency, energy saving and environmental protection, which is suitable for the production of pure aluminum and aluminum alloy.
To ensure the stable and efficient production of continuous casting and rolling machine, the installation process should be accurate and the installation should be in accordance with the requirements of the installation instructions. Here are the main steps for installation of aluminum wire billet continuous casting and rolling machine:
1. Foundation installation: Different manufacturers and models will have different requirements for the foundation of the machine. Customers must follow the manufacturers requirements when they choose the foundation. Generally, the foundation needs to be flat and can withstand the pressure of the machines during production.
2. Lifting equipment and erection: The various components of the machine must be connected flawlessly to ensure safe and satisfactory operation. Therefore, when erecting the equipment, special attention must be paid to the whole erection procedure. The parts should be covered, the dust should be cleaned up, and the bolts should be tightened in order to ensure safety and firmness.
3. Lubrication system: A lubrication system is essential for the proper operation of the machine and it is important to abide by the criteria when installing it. When installing the oil pipe, do not kink it, and the connection should be firm and free from leakage. The oil pipe should also be fixed in place, and away from high temperature and corrosive conditions.
4. Electrical wiring and system debugging: The whole electrical system must be wired up in an orderly manner. The color coding and wiring must match the requirements for different function blocks. All the electrical wires should be insulated and insulated from the ground to avoid electric leakage or short circuit accidents. The oil circuit debugging system must also be carried out to ensure the normal operation of the machine.
5. Inspection and commissioning: At the same time, the installation and commissioning team should focus on the installation of important parts and components to ensure that the machine is in accordance with the requirements and fully operational.
The installation of aluminum wire billet continuous casting and rolling machine needs to be accurate, and all the steps should be strictly followed to ensure the safe, smooth and efficient production.
