Maintenance Requirements of Furnace Fan
The furnace fan is an important part of the power plant. In order to ensure the safe and efficient operation of the fan, carry out regular maintenance and maintenance.
1 ? Regular inspections
The first is to carry out daily maintenance and regular inspections. First of all, check the equipment of the production site. Whether the equipment is in the correct position. Check whether there is any friction between the moving parts. The belts that transmit power can check the tightness and integrity. Hooks, bolts and nuts must be fastened. Check the axles, bearings and other transmission parts of the fan shaft at least once a year to ensure that there are no abrasion traces or loose parts on the surface. The motor of the fan should be cleaned in time and checked whether the wiring is correct.
2 ? Change oil regularly
Furnace fan maintenance also requires regular oil changes to ensure the cleanliness and lubricity of the bearing. When replacing, remove the bearing cover and drain out the old oil, clean the bearing and its parts, inject new oil until the oil level is within the safe range, then tighten the protective cover. Grease lubrication should also be applied to important rotating parts and bearings every two or three months.
3.Clean up debris
Furnace fan maintenance also needs to regularly clean up dirt, dust, otter and other debris on the surface, so as to ensure smooth ventilation and avoid fire risk caused by accumulation of dirt. Pay special attention to the fan cooling cabinet around the motor, because the cooling air will bring in some dust and debris, which needs to be cleaned up. In addition, the filter at the air inlet also needs to be regularly cleaned and replaced in time.
In summary, the maintenance of furnace fan must not only carry out regular maintenance and maintenance, but also pay attention to the details of cleaning and oiling, so as to ensure its more efficient operation and make it the important guarantee of power plant safe and efficient operation.
