Introduction
In recent years, GB15386 is the safety registration management method for air-cooled heat exchangers products. In order to ensure the performance, safety, energy saving and environmental protection of air-cooled heat exchangers products, and to ensure the safe and healthy production and use environment of air-cooled heat exchangers products, State Administration of Quality Supervision, Inspection and Quarantine of the Peoples Republic of China issued the “Regulations Governing the Safety Registration of the Air-cooled Heat Exchangers” (referred to as” GB15386”). This article mainly introduces the content of GB15386.
General rules
GB15386 provides the general provisions and procedure for the safety registration of the air-cooled heat exchangers, referring to the “Rules for Safety Registration of Special Production Equipment”. The main contents include the safety acceptance rules of the air-cooled heat exchangers, the safety catalogues, the safety technical requirements and relevant registration items of the air-cooled heat exchangers. The air-cooled heat exchangers safety registration documents, safety symbols and nameplates shall be paid attention to.
Safety acceptation rules
The safety acceptance of the manufactured air-cooled heat exchangers shall be made according to the “Rules for Safety Acceptance of the Special Equipment”. The safety acceptance shall be established on the basis of manufacturing process, quality assurance, acceptance test and technical documents, and the results of the quality acceptance shall be expressed in a report.
Safety directories
GB15386 does not specify any special safety technical requirements for the air-cooled heat exchangers. The holder of the safety registration controller summarizes the safety technical requirements of the air-cooled heat exchangers on the basis of the international standards, standards of other countries, existing industrial standards and existing similar products.
Safety technical requirements
The safety technical requirements of the air-cooled heat exchangers shall be determined according to the combination of three aspects: one is the Chinas Industry Standard; two is the technical requirements proposed by the holders of the safety registration controller; the other is the research results of the holders of the safety registration controller. The holders of the safety registration controller should also report the results of their research to the national departments in charge of the quality control of special equipment.
Safety registration items
The safety registration items of the air-cooled heat exchangers include the safety certification label, safety technical document and safety mark, which shall be attached to the products or the packaging according to the national regulations.
Conclusion
GB15386 is the safety registration management method for air-cooled heat exchangers products, providing the general provisions and procedures for the safety registration of air-cooled heat exchangers. The safety acceptation of the air-cooled heat exchangers should refer to the “Rules for Safety Acceptance of the Special Equipment”. Safety technical requirements, safety directories, safety registration items, safety certification label, safety technical document and safety mark should be paid attention to.
