M3140A Suspended Grinding Wheel Machine Operation Procedure
1. Brief Introduction
M3140A Suspended Grinding Wheel Machine is a kind of CNC precision processing machine applicable for high hardness material like die steel. It can complete the whole processing route from material cutting off to finishing and fine grinding in one setup.
2.Operation Guide
2.1 Preparation before operation
1) Wear suitable protective equipment like apron, helmet and gloves.
2) Check the lubrication system and refuel if necessary.
3) Check the connection of the electricity system and turn on the power.
4) Detect the air pressure of the board and adjust to 0.6 Mpa.
2.2 Machine commissioning
1) Set grinding wheel specifications
2) Put the grinding wheel into the grinding wheel holder and fix with screws.
3) Load the workpiece.
4) Adjust the position of the steady rest according to the size of the workpiece.
5) Turn on the machine and adjust the auxiliary handwheel according to the size of the workpiece.
2.3 Operation
1) Start the grinding wheel motor.
2) Start the oil pump for cooling.
3) Check the pressure distributing device and the grinding wheel gap.
4) Grinding the workpiece.
2.4 Operation during machining
1) Observe the workpiece mechanical size and machining quality frequently.
2) Keep the oil flowrate of 4L/min.
3) Stop the grinding wheel and wash the stopper in water frequently.
2.5 Shut down
1) Stop the grinding wheel and the oil pump respectively.
2) Clean the grinding wheel and the stopper with water.
3) Clean all the dust on the machine.
4) Clean the oil tank and cut off the power.
3. Alarm
If the machine alarms, please stop the operation and find out the fault and solve it.
4. Maintenance
1) The oil must be changed in time.
2) Refuel regularly and clean the oil tank.
3) Clean the exterior of the machine frequently.
4) Check the complete machine for any faulty parts.
5) Tighten the screws regularly.
6) Check and replace the worn parts.
5. Accidents
1) If the machine is overloaded, the fuse will be burned out and must be replaced in time.
2) Keep a safe distance from the machine during operation.
3) Repair work or maintenance should be carried out when there is no personnel in the workshop.
4) Do not let children enter the workshop.
6.Conclusion
The above is the M3140A suspended grinding wheel machine operation procedure, it is really important to understand and follow the instruction guide before operating, which can help us to use the machine safely and efficiently, and maintain good mechanical performance.
