Debugging of Computer Control System in Initial Rolling Process
The debugging of computer control system in initial rolling process is essential in order to obtain good products with steady quality. Various strategies have been adopted for different objectives of debugging. This paper summarises the debugging strategies for computer control system in initial rolling process, and the strategies include the gathering of data from the system, the reviewing of the parameters of the system, the tuning of the system, and the testing of the systems performance.
Data Gathering
When debugging the computer control system in initial rolling process, data gathering is a must. Data gathering should include the collection of real-time operational data as well as historical operational data in order to better analyse and understand the process dynamics. Data should also come from both hardware and software output interfaces, as well as other external sensors which may be used to monitor the process.
Parameter Review
Another important step to take while debugging the computer control system in the initial rolling process is to review the parameters used in the system. The parameters of the system should be checked against the specifications in order to determine if the values used are within the accepted range. Any parameter not in the accepted range should be corrected to fall within the range with the greatest degree of accuracy.
System Tuning
System tuning involves the adjustment of certain parameters of the system to enhance its performance. This can be done through manual or automated tuning, depending on the availability of the necessary equipment and personnel. In manual tuning, the engineer must manually adjust certain parameters of the system to maximize its performance. In automated tuning, certain parameters can be changed automatically to improve the performance of the system.
System Testing
After the system tuning process, it is necessary to test the performance of the system. This is done using various test scenarios, which involve the examination of the systems capability to perform different functions such as data logging, I/O operations, control algorithms, data acquisition and processing, and other applicable tests. It is important to test the system’s performance in different environmental conditions, in order to ensure that it can withstand the rigors of industrial use.
Conclusion
Debugging of the computer control system in the initial rolling process is a necessary step in ensuring that the system can provide the emulators in producing a desired product with a steady quality. The debugging process should include the gathering of data from the system and its external sources, as well as parameter review and tuning, and system testing. Through these steps, the system can be fine-tuned to perform its intended functions and meet the process requirements.
