Noise Measurement and Evaluation of TGB10890-89 Pump
1 Introduction
Noise is a very important factor to consider when selecting machinery and machinery. In order to accurately select the machinery, it is necessary to measure and evaluate the noise emission from the machinery. TGB10890-89 pump is a mid-range pump, which is widely used in various industries. It is important for us to know its noise performance, so as to accurately evaluate its suitability for a certain application. This paper will discuss the measurement and evaluation methods of the noise from TGB10890-89 pump.
2 Measurement
In order to accurately measure the noise of TGB10890-89 pump, a sound level meter should be used. This device has the ability to measure A-weighted decibels (dBA) or C-weighted decibels (dBC). To obtain the most accurate results, the sound level meter should be placed in the same environment as the pumps operating environment. In addition, the sound level meter should be set to A-weighted decibels (dBA).
In order to measure the background noise, the sound level meter should be placed in the vicinity of the pump, but away from any other sources of noise. The background noise reading should then be noted as a reference. Following this, the noise from the pump should be measured in the same way. The difference between the two readings give the noise emitted from the pump.
3 Evaluation
Once the noise emission from the TGB10890-89 pump is measured, it should be evaluated to determine whether the noise level is suitable for the particular application. The noise emitted should be compared to the environmental noise standard. If the noise emitted is higher than the environmental noise standard, then corrective action should be taken. In most cases, this involves the use of noise dampening materials to reduce the noise.
In addition, the type of sound emitted by the TGB10890-89 pump should also be taken into consideration. Human beings have a tendency to be more sensitive to certain types of sound than others. Low frequency noises, such as those emitted by the TGB10890-89 pump, can often be more intrusive than high pitched noises. Therefore, these should be considered when evaluating the noise emitted by the pump.
4 Conclusion
Noise is an important factor to consider when selecting machinery, and it is necessary to measure and evaluate the noise emitted by the machinery in order to accurately select the best option. The TGB10890-89 pump is a mid-range pump, which is widely used in various industries. To accurately measure the noise emitted by the TGB10890-89 pump, a sound level meter should be used. Once the noise emission from the pump is measured, it should be evaluated to determine whether the noise level is suitable for the particular application.
