Z8612 (12 kilograms) Hot Core Box Core Shooting Machine Operation Procedure
1. General
The Z8612 (12 kg) Hot Core Box Core Shooting Machine is an important production equipment in the automotive industry, mainly used for producing complex core shapes. The machine is easy to operate and maintain and has excellent performance.
2. Preparation before operation
(1) Before starting the machine, check the machine parts to ensure that there is no petrochemical oil or rust on the surface, and the machine is clean and dry.
(2) Check if all the components, parts and electrical wiring of the machine are in good condition, and the connection is firm.
(3) Check the location of the emergency stop switch and emergency stop knob, and ensure that the knob is connected correctly, and emergency stop can be activated.
(4) Inspect all moving parts to ensure that there is no blocking or deformation, and check whether all the screws and fasteners are firm.
3. Operation
(1) Place the core box closed on the core shooting machine, ensuring that the core box is centered and firmly fixed.
(2) Place the core into the investment tray, and fasten the tray with the machine clamps.
(3) Cover the refractory and insulation materials over the core box.
(4) Connect the furnace to the machine and set the temperature according to the casting requirements.
(5) Turn on the power switch, the control cabinet is powered on, and then press the start button of the Z8612 (12 kg) Hot Core Box Core Shooting Machine.
(6) Adjust the ram speed and stroke length according to the products and casting pressure requirements.
(7) After casting is complete, press the emergency stop button to stop the machine and then turn off the power switch.
(8) Open the core box and take out the core.
(9) Clean the core, core box and other parts of the machine.
4. Maintenance
(1) Check the power supply system and electrical wiring of the machine regularly to ensure the safety of the operation.
(2) Check all moving parts and fasteners regularly to ensure that they are in goodworking condition.
(3) The refractory and insulation materials need to be replaced if damaged to ensure the casting quality.
(4) Clean the machine regularly to ensure its smooth operation.
5. Safety precautions
(1) During the operation of the machine, personnel should be away from the machine, and only the operator is allowed to operate the machine.
(2) Wear protective clothing and protective equipment when operating the machine.
(3) Keep combustible materials, liquids andi electrical equipment away from high temperature zones.
(4) Forbid workers to make any changes or repairs to the machine without authorization.
(5) Work should be stopped in case of any abnormalities.
