Blast Furnace Nickel Melting Furnace Workshop Design
Blast furnace nickel melting furnace is the most commonly used equipment in the smelting process of nickel and its alloys. Nowadays, this kind of furnace has played an important role in the production and research of stainless steel, steel, alloy steel, high temperature alloys and other nickel-containing alloys. The workshop design of blast furnace nickel melting furnace should take into account the operation safety, energy consumption, raw material utilization and other factors.
First of all, in the design of the workshop, the layout should be reasonable, pay attention to the arrangement of process pipelines and the maintenance of equipment, and the design should meet the requirements of ease of production, safe operation and convenient maintenance. Spatial coordination should be integrated into the workbench, the family should have enough height from the ground, and the height of the mezzanine platform of the melting furnace should be suitable for the manufacture, maintenance and repair of the furnace.
Secondly, in terms of energy use, blast furnace nickel melting furnace is important equipment for energy-saving and environmental protection. Its energy saving mainly depends on the improvement of combustion efficiency and the optimization of process flow. At the same time, in the design of the workshop, low energy-consuming lighting lighting should be selected and the energy can be effectively saved.
Thirdly, the raw material utilization of blast furnace nickel melting furnace also needs to be considered in the workshop design. The selection of materials should be considered from the convenience, safety and cost of later production, and the selection of materials should be as low as possible to reduce the cost of raw materials. In addition, when choosing the material of the furnace wall, the thermal conductivity of the material should be considered to ensure better heat transfer performance of the furnace.
All in all, in the design of the workshop, in addition to ensuring safety, energy saving and efficiency, the most important thing is to ensure the production rate and quality of the product. The process needs to be simple and easy to operate, and the design should be controlled and emphasized on the production process quality, safety factor and energy saving. Finally, the design of the workshop of the blast furnace nickel melting furnace should be reasonably planned and the construction should be completed after being approved, so as to ensure the construction quality and timely put into use.
