Rolling disc rotary sand mixer operating procedures

Operation Rules of Rotary Mixer Introduction The rotary mixer is generally used for the mixing and coating process of mining, chemical and other powder materials. It is mainly composed of mixing cylinders and covers, frames, gearboxes, motors, etc. The number of rotors can be designed according ......

Operation Rules of Rotary Mixer

Introduction

The rotary mixer is generally used for the mixing and coating process of mining, chemical and other powder materials. It is mainly composed of mixing cylinders and covers, frames, gearboxes, motors, etc. The number of rotors can be designed according to customer requirements. The quantity and size of the blades and the speed of the mixed material will affect the mixing effect. In order to ensure the uniformity of the mixed material and improve the quality of the mixed product, it is important to properly operate the rotary mixer.

1. Preparation before use

a) Please check the tightness of all bolts before use.

b) Please check the lubrication system of the gearbox and the lubricity of the gearbox.

c) Please check that the motor is consistent.

2. Start up

a) Turn the switch of the motor to start the rotary mixer and slowly put the material in the mixer.

b) Turn the rotary handle on the top cover counterclockwise until it stops, as shown in the figure. Make sure that the cover is firmly fixed.

c) After the material is put into the mixer, slowly increase the speed of the motor, and the speed should be stable.

d) During operation, it is necessary to check the rotation of the blades regularly, and adjust the speed of the motor appropriately.

3. Shutdown

a) After finishing the mixing of materials, slowly close the switch of the motor, stop the rotation of the mixer and remove the material.

b) After the material is removed, loosen the handle on the top cover counterclockwise to loosen the cover and separate the mixer.

c) Use a wire brush to clean the edges of the mixer, and use a vacuum cleaner to clean the mixture inside the mixer.

d) Check the gearbox for any damage.

4. Safety precautions

a) Please ensure the reliability of grounding and make sure the protective cover is tightly closed before starting.

b) Do not open the container with wet hands.

c) Please ensure that there is no hard material in the container before operation.

d) Do not move the motor and mixer when the motor is running.

e) Do not clean the container with sharp or rough objects.

f) In case of malfunction or fault, please promptly notify the maintenance personnel to check and repair it.

Put Away Put Away
Expand Expand

Commenta

Please surf the Internet in a civilized manner, speak rationally and abide by relevant regulations.
Featured Entries
engineering steel
13/06/2023
two stage bidding
03/07/2023