Installation and Troubleshooting of Agricultural Water Pump
Agricultural water pump is the most important device of agricultural irrigation system. Installation and Troubleshooting of agricultural water pump is a common problem that the majority of users encounter. This article will analyze the installation and troubleshooting of agricultural water pump in detail and dig out some protection suggestions.
The installation of agricultural water pump
First of all, the user needs to determine the required power of the water pump before the installation. The power should match the pump size. The user needs to consult the professional personnel to decide the size and specifications of the pump. Secondly, choosing a suitable foundation to place the water pump is very important. The foundation should be leveled and solid, and then screws and steel bars should be used to fix the water pump, in order to prevent it from shaking. Thirdly, the water inlet and outlet should be kept clean and smooth, then the inlet and outlet pipelines should be connected to pumps. Finally, the power should be connected to the water pump and other components.
Troubleshooting of agricultural water pump
When the water pump is not running properly, the user needs to identify the cause to troubleshoot. 1) Check whether the power supply is connected properly or not. 2) Clean the inlet and outlet pipes and check whether the water is too large or too small. 3) Check whether the motor is running properly or not. 4) Clean the sand, mud and debris on the pump parts. 5) Check whether the cycle time of the pump is correct. 6) Check whether the valve is opened or not.
In order to ensure the safety of the water pump, regular maintenance and inspection should be done. The water pump should be inspected regularly every two months and cleaned once a month. When the pump is running, the user needs to pay close attention to the operating state of the pump and check the temperature of the motor. If the temperature is too high, please stop the pump immediately and investigate the cause. In addition, when the pump stops abnormally, check and maintain the pump in time, and replace the worn parts.
In summary, installation and troubleshooting of the agricultural water pump are fundamental problems that users often encounter. Before installation, the size and power of the pump need to be determined according to the usage requirements. When maintaining the pump, the user needs to pay attention to the working status and regular inspection and cleaning of the pump. Finally, when the pump does not run correctly, the user needs to identify the cause and promptly troubleshoot the problem.
