1. Scope of the document
This document aims to describe the technical parameters of the hydraulic press forming machine. The supplied equipment should provide accurate, reliable and fast forming operations for various types of materials. The hydraulic press forming machine must meet the following design requirements.
2. Hydraulic Filtration System
The hydraulic press forming machine must use a filtration system with a maximum working pressure of 400 bar and a nominal operating temperature of 80°C. The filtration system must consist of a suction filter, a return filter and an intermediary filter cartridge. The filter must be able to hold a reasonable amount of contaminants while offering satisfactory filtration performance. In addition, the filter should be able to regenerate quickly in order to ensure continuous operation.
3. Pneumatic System
The pneumatic system of the hydraulic press forming machine must support a maximum pressure of 6 bar and a minimum temperature of 5°C. The pneumatic system should include an air compressor, air receiver and air dryer. In addition, an air pressure regulator should also be included in order to regulate the flow of air to the machine as per user requirements.
4. Actuators and Motors
The hydraulic press forming machine should be equipped with actuators and motors that are of high efficiency and have long service life. The actuators must be capable of delivering accurate operations even under varying conditions. The motors, on the other hand, should be able to provide a range of speed and torque which should be accurately adjustable.
5. Control System and Safety Devices
The machine should include a control system that is able to accurately and precisely control the operation of the machine. The machine must also have all necessary safety devices installed in order to ensure the safe operation of the machine at all times.
6. Machine Frame and Enclosure
The hydraulic press forming machine must be equipped with a heavy-duty rigid frame which should be able to absorb shock and vibrations. The frame should also be able to conform to the shape of the item being formed. The machine should also be provided with a suitable enclosure to provide adequate safety and protection against dust, dirt and other contaminants.
7. Power Supply
The hydraulic press forming machine should be powered by an electrical motor with a voltage of 220V/380V/440V AC, a frequency of 50Hz/60Hz and a power of 3-7 kW. The machine should be also provided with a ground fault protection device.
8. Maintenance and Lubrication
The hydraulic press forming machine should be maintained and lubricated regularly in accordance with the manufacturer’s instructions. The lubricating system should be able to reduce wear and tear and should also include an oil level indicator.
Conclusion
The above mentioned technical parameters are necessary for the successful operation of a hydraulic press forming machine. It is important that the machine is supplied with high quality components in order to ensure maximum performance and reliability.
