3010S waste mud core crushing drum operating procedures

, Rolling Core Breaking Operating Procedure of MST-3010S Wastewater Sludge The operator of the MST-3010S wastewater sludge core breaking roller is responsible for ensuring the safe and efficient operation of the equipment. In order to ensure the correct and correct operation, the following rules ......

Rolling Core Breaking Operating Procedure of MST-3010S Wastewater Sludge

The operator of the MST-3010S wastewater sludge core breaking roller is responsible for ensuring the safe and efficient operation of the equipment. In order to ensure the correct and correct operation, the following rules and regulations should be strictly observed and implemented.

1. Before using the MST-3010S wastewater sludge core breaking roller, the operator must first carefully check whether the roller has all the necessary accessories such as bolts and lubricants, and whether the appearance of the parts is clean and not rusty. If there are any damages, deformation or loose parts, it must be replaced or adjusted in time.

2. Before turning on the power, the operator should first check whether the power voltage conforms to the requirements, and whether the power plug itself is damaged. If there is a problem, it should be handled in a timely manner.

3. Before starting the device, the operator should first in accordance with the instructions of the manufacturer, check whether the various components of the roller are in good contact state.

4. When turning on the power, the operator should pay attention to the running state of the device. If there is any abnormal sound, power failure or other situation, turn off the power in time to find out the cause.

5. When the core breaking roller is operating, the operator should pay attention to the current reading, temperature and other data to prevent overloading and causing fire accidents.

6. After the core breaking roller is in operation, the operator must pay attention to lubrication and refueling, and use the specified type and amount of lubricating oil.

7. After work, the operator must check the wear of the parts and the tightness of the parts, and if found to be loose, it must be tightened in time.

8. Before shutting down the power, the operator must apply the specified types of cleaners and cleaning agents to the core breaking roller and wipe it off with a soft cloth.

9. In the operation of the core breaking roller, the operator should strictly observe the regulations, and in the process of operation, cooperate closely with the colleagues to ensure safe and efficient production.

Put Away Put Away
Expand Expand

Commenta

Please surf the Internet in a civilized manner, speak rationally and abide by relevant regulations.
Featured Entries
Composite steel
13/06/2023
engineering steel
13/06/2023
ship board
24/06/2023