Hot dip galvanized steel wire
Hot dip galvanized steel wire is a kind of galvanized steel wire regarding hot dip galvanization with zinc as the main component in the coating structure. It has good corrosion resistance, excellent adhesion between coating and the base material and hard coating, and it is widely used. Hot dip galvanized steel wire is mostly used in communication equipment, agricultural facilities, and electronic products.
Hot dip galvanized steel wire is made by drawing a steel wire which has been provided by high-quality low-carbon steel. After annealing and pickling, it goes through continuous hot dip galvanization process. The galvanizing operators use zinc as the electrolytic tank to complete the coating process. The resulting steel wire is smooth and shiny, with excellent adhesion and anti-fatigue performance.
The most typical size for hot dip galvanized steel wire is 4.00mm-4.80mm, but does not subject to length and weight limitations. The requirements for the surface must be smooth and without pitting, black spots, oxidation and other defects. The surface of hot dip galvanized steel wire should have a uniform and film adhesion, and the galvanization should achieve the requirements of coating weight, in order to meet the clientss unique needs.
Hot dip galvanized steel wire products are available in different sizes and in various shapes as well, ranging from wide flange structural shapes, angle, flat beam bars, round bars, to wire rods, among other types. Further, the weight of the steel wire can be tailor-made depending on the requirements of the customers. The allowable deviations must not be too significant, and must comply with the set standards in this regard.
In conclusion, hot dip galvanized steel wire is a versatile product that offers excellent corrosion resistance and mechanical characteristics, featuring a silvery white outer coating and excellent adhesion of the coating to the steel wire. It is mostly used for communication lines, agricultural facilities, and for a variety of commercial and industrial applications. Proper requirements for size, shape, weight and allowable deviation must be met in order to guarantee consistent quality. Therefore, customers are advised to carry out thorough inspection and tests in order to ensure that all these requirements are met.
