Tractor Fault Emergency Treatment
Agricultural tractors are a kind of vehicle used for farming work. The use of agricultural tractors can significantly reduce the workload of farmers, enhance production efficiency and increase production. Therefore, the farmers are not worried about the failure of the tractor, because it may bring losses to their production work.
In order to prevent the occurrence of vehicle failure, the first thing is to ensure that the normal use of the tractor, so as to ensure the safety of the staff, and secondly, to carry out preventive maintenance in accordance with the normal use procedures, so as to reduce the mechanical failure as much as possible.
However, due to the complexity of working conditions and the bad environment in the work, these systems may still be damaged. So in the event of machine failure, how should we deal with it?
First, if the tractor stalls or stalls, the engine should be stopped first, check whether the fuel supply flow is normal, if not, adjust the nozzle; check if the exhaust valve is off, if yes, adjust it.
Second, if the tractors power is unstable, the spark plug is first checked to see if it is too tight or fouled, and the gap should be adjusted if necessary. If the add/erase of spark plug is serious, the spark plug should be cleaned or replaced to ensure the normal power distribution of the engine.
Third, if the engine is not running smoothly, it is necessary to check whether there is air in the air pipe, and remove the air if necessary. Check the ground connection of the fuel injection pump.
Fourth, if the tractor runs unevenly, check the voltage distribution of the high voltage line and check whether there is spark on the plug. If there is spark and the engine power is still insufficient, the fuel pipeline should be checked for any blockage.
Fifth, if some systems of the tractor are short-circuited, it is necessary to check the wiring mode of the system and check whether the circuit is connected correctly.
Sixth, in the event of mechanical failure such as clutch failure, all parts of the system should be checked first, and then the components should be checked to see if they are severely worn, and if so, it is necessary to replace them with new parts.
Finally, all kinds of industry norms should be strictly implemented in daily maintenance, so as to reduce the probability of tractor failure to the greatest extent.
In summary, things have to have regular maintenance, so mechanical faults can be greatly reduced, so that it can ensure that the tractor can be used normally, as well as optimize production efficiency.
