Introduction
Rough Plastering is the process of applying plaster to a surface for the purpose of creating an even, solid foundation for a finished wall. Rough Plastering is important for any construction project, from walls and ceilings in homes to the walls of commercial buildings. Applying a solid plaster base to a surface is essential for the longevity of a structure, and for preventing any air or moisture from entering the interior.
The Tools Used for Rough Plastering
A variety of different tools are necessary for the successful completion of any rough plastering project. The most important tools are the plasterer’s hawk, the plaster trowel, the masonry brush and the plaster hawk. The plasterer’s hawk is a flat, square-shaped metal frame used to carry and apply the plaster. The plaster trowel is used to spread the plaster evenly over the surface. The masonry brush is a metal or stiff-bristled brush used to groom the surface before applying the plaster. The plaster hawk is a large, round metal plate that is used to scoop and spread the plaster.
The Process of Rough Plastering
Rough plastering is a two-step process. First, the surface must be prepped and evaluated to ensure it is ready for the application of plaster. All nails, dirt and debris must be removed from the surface, and the surface should be level and even. Next, an estimate of the amount of plaster needed must be made, and the desired texture should be chosen.
Once the surface is prepped, the second step can begin. This is the actual application of the plaster to the surface. The plasterer’s hawk should be filled with enough plaster to cover the surface. It is then necessary to spread the plaster evenly and with full coverage. The masonry brush can be used to groom the surface while the plaster is still wet. Finally, the plaster hawk can be used to scoop and spread the plaster as necessary. All of these steps should be repeated several times until the desired coverage and look is achieved.
Conclusion
Rough plastering is an important part of any construction project, and is necessary for achieving a strong, lasting surface. The tools necessary to complete a plastering project include a plasterer’s hawk, a plaster trowel, a masonry brush and a plaster hawk. The process of rough plastering consists of a two-step process: prepping the surface and applying the plaster. By following the steps outlined above, any project can be a success from start to finish.
