CNC Machine Lubricating Characteristics
In order to ensure the continuous and efficient operation of the CNC machine tool, lubrication should be carried out in a scientific and reasonable manner. Improper lubrication not only wastes lubricants, reduces the working performance and service life of machine tools, but also increases the wear of parts. Therefore, a scientific and rational lubrication system is necessary for the operation of the CNC machine tool.
It is beneficial to reduce the wear of the machine tool, reduce noise and maintain the accuracy of the machine tool when lubrication is carried out reasonably. The lubrication characteristics of CNC machine tools are as follows:
1. According to the requirements of the CNC machine tool manufacturers, the lubrication amount must be considered, and the lubrication time should not be too long.
2. The lubrication method of the CNC machine tool should be selected according to the different parts. Soaking, spraying and manual brushing were generally applied. It is required that the lubrication interval of different parts shall be determined according to their own requirements or the conditions of their use.
3. It is better to select lubricating oil or grease when lubricating, and the quality of the selected lubricating oil shall meet the requirements of the machine tool. In addition, it is necessary to immediately stop the machine tool after the lubrication is completed and finally check the lubrication point.
4. Lubricating oil shall be removed and replaced regularly. Grease shall not be mixed too much, different types of grease shall not be mixed, and the bearing house shall be cleaned before filling in the new grease.
5. During the application of the CNC machine tool, it is necessary to regularly check the lubrication of the lubrication parts, replace the lubricating oil and greases in time, and clear away theimpurities on the lubrication parts in time.
Overall, lubrication is essential for the operation of the CNC machine tool. Keeping it in good condition can reduce wear and tear as well as perform at a higher level of efficiency. Therefore, it is important to keep the CNC machine tool properly lubricated and engage in regular maintenance through periodic check-ups.
