DeMaek 15°/75° Cross over Plating Mill and Morgan Next Generation V-Section Mill
The DeMaek 15°/75° cross-over plating mill and the Morgan Next Generation V-Section mill are two of the most popular strip processing machines on the market. Both machines offer similar capabilities, but have their own unique advantages that make them suitable for different applications.
The DeMaek 15°/75° cross-over plating mill is a high speed strip processing machine that can be used for a variety of purposes, including cold rolling and annealing. It is designed to produce a medium thickness and low yield. It is an ideal choice for high quality applications such as automotive, aerospace and medical. It also is equipped with a number of safety and control features that ensure that the machine operates safely and efficiently.
The DeMaek 15°/75° cross-over plating mill is powered by a 220V/3-phase electric motor which is mounted on the machine body. It has a maximum roll gap of 4.5 millimetres and a working speed of up to 140 metres per minute. It is equipped with a steel working table and a stainless-steel crown where the coils are being rolled. The working table can be adjusted by the operator for different thickness of the product. It is also equipped with safety sensors to detect any defects in the material being rolled.
In addition to its basic features, the DeMaek 15°/75° cross-over plating mill has a number of other features, including: automatic material feeding system, automatic coil coating system and automatic unit sizes measurement. In addition, it can process up to 600mm wide coils and 1.2mm thickness.
The Morgan Next Generation V-Section mill is another high speed strip processing machine. It is designed to produce a medium thickness and high yield. It has a number of safety and control features, such as automatic gap adjustment and data logging, which can be set up by the operator. The Morgan Next Generation V-Section mill is powered by a 220V/3-phase electric motor and has a maximum roll gap of 5 millimetres. It also has a variable speed system that allows the operator to process coils of different thickness.
The Morgan Next Generation V-Section mill is equipped with a stainless steel working table and a crown where the coils are rolled. The working table can be adjusted for different thickness of the material and is also equipped with safety sensors to detect any defects in the material being rolled. The machine is equipped with automatic material feeding system, automatic coil coating system and automatic unit sizes measurement. It also has a wide range of coil widths ranging from 0.6mm to 600mm and a variety of cross and longitudinal rolls that can be used for coating and/or annealing different products.
Both the DeMaek 15°/75° cross-over plating mill and the Morgan Next Generation V-Section mill are well suited for various applications such as automotive, aerospace and medical. Each offers unique advantages that make them appropriate for different jobs. The DeMaek 15°/75° is best for high-quality applications, while the Morgan Next Generation is best for high-yield applications. The features of each machine should be closely evaluated to determine which machine is the best fit for a particular application.
