Casting defects repair welding machine is a kind of equipment specially developed to weld the casting defects of iron castings, in order to improve the product qualification rate and increase the customer satisfaction. At present, this equipment has been widely used in many processing centers and has received wide recognition from operators due to its outstanding performance and high welding quality.
The main performance of the casting defects repair welding machine is as follows. First, the welding effect is very good. The laser welding method is adopted in the welding process, so that the welding effect is far better than that of traditional manual welding. The welding depth, welding width and penetration depth can be adjusted according to the actual situation. Therefore, it can meet the welding needs of different products and materials. Second, the operation is very simple and convenient. The complete welding process can be completed within a few minutes, and the entire welding process is automatic. The operating personnel only need to adjust the operating parameters according to the requirements of the product. Third, the welding speed is very fast. The welding speed of this machine is 8-15 times of that of traditional manual welding. At the same time, there is no need to perform preheating, post-welding treatment and other processes, which greatly reduces the processing time. Fourth, the welding quality is very reliable. The overall welding quality is comparable to that of traditional manual welding. At the same time, the casting defects repair welding machine also has the advantages of low noise, high temperature resistance, corrosion resistance, shock resistance and so on.
In short, the casting defects repair welding machine has many outstanding advantages. It can be widely used in welding and repairing casting defects of iron castings, such as welding and repairing cracks and holes, as well as welding and repairing burrs, slag hole geometric shape defects, and restoring the surface flatness of defective castings. In addition, it can also be used for the welding and repair of components such as frames, oil tanks and wind box, which have certain welding requirements. Therefore, it has broad application prospects in the processing industry.
