Handling and storage of bearings

Bearing transfer and storage Bearing is one of the most important and widely used components in machinery and engineering. It has a wide range of applications, from automotive to aerospace engineering. In order to ensure that bearings are used effectively and safely in machining, transportation a......

Bearing transfer and storage

Bearing is one of the most important and widely used components in machinery and engineering. It has a wide range of applications, from automotive to aerospace engineering. In order to ensure that bearings are used effectively and safely in machining, transportation and storage must be carried out in strict accordance with the principle. In view of this requirement, this paper mainly discusses the transfer and storage of bearings.

When it comes to bearing transfer and storage, the main focus is on ensuring the bearing itself is safe to handle. There are several common methods of bearing transfer, such as manual transfer and mechanical transfer. Manual transfer is the most basic and convenient method. It is suitable for relatively small quantities of mainly standard bearings. Mechanical transfer is usually suitable for large quantities of bearings and also for bearings of non-standard size. This method requires professional personnel to complete and is not suitable for ordinary users.

In addition, safe handling and stack loading of bearings need to be strictly followed. When handling bearings, personal protection must be done properly, such as wearing safety glasses, suitable protective clothing and gloves. During the transfer and stacking of bearings, it is necessary to ensure that no mechanical edge is used to scratch the bearing. The bearing must be handled in its original package, and then unloaded and transferred. When loading a stack of bearings, it is necessary to take anti-rolling measures.

In terms of storage, bearing should also be handled in its original packaging, covered with a cloth and stored in a dry and clean place. The storage environment for bearing should not be too hot or too cold. Avoid contacting with acid or alkaline substances, and strong magnetic field, etc..

When bearing is stored, it is necessary to label clearly and organize clearly, so as to facilitate later use and avoid confusion. In case of bearing inventory or need to be temporarily stored for a long time, it is necessary to spray anti-rust oil or other special antirust operation on the bearing inner and outer ring, and then put it into the bearing paper box or plastic bag, and store it in a dry place.

In summary, the transfer and storage of bearing is a very important process, and good bearing management is essential. It is necessary to ensure that the bearing is handled with care and stored and protected properly. Only in this way can the normal use of bearing be ensured, and the full play of bearing performance can be achieved.

Put Away Put Away
Expand Expand

Commenta

Please surf the Internet in a civilized manner, speak rationally and abide by relevant regulations.
Featured Entries
slip
13/06/2023
ship board
24/06/2023