Factors Influencing the Jumbo head and tail Yield of Billet Cutting
Introduction
The yield rate of jumbo head and tail of billet cutting is a very important factor in the steel making industry, because it directly affects the production cost and efficiency. It is also an important indicator of production technology. In order to improve the yield rate of jumbo head and tail, it is necessary to investigate and analyze the influencing factors of the yield rate.
1. Factors related to billet quality
Billet quality is a major factor influencing the yield rate of jumbo heads and tails. The texture of the billet and the content of impurities affect the precision of the cutting, and the small difference between the head of the billet and the tail of the billet affects the yield rate of the jumbo head and tail. In addition, when the edge type of the billet is not uniform, the cutting precision is affected and the yield rate of jumbo heads and tails is decreased.
2. Factors related to the cutting equipment
The cutting equipment is also an important factor that affects the yield rate of the jumbo head and tail. The cut head distance, cut tail distance and cut angle of the billet need to meet the requirements. If the position of the jumbo head and tail cutting equipment is not accurate enough, the yield rate of the jumbo head and tail will be reduced; if the contact pressure between the blade and the billet is not uniform, the contact line is not perpendicular to the billet surface, and the cut angle is not standard, the yield rate of the jumbo head and tail will be reduced.
3. Factors related to the cutting process
The cutting process of the billet is a very important factor that affects the yield rate of the jumbo head and tail. If the speed of the billet is too fast or too slow, it will cause the cutting size to be non-standard, resulting in a decrease in the yield rate of jumbo heads and tails. In addition, if the position of the jumbo head and tail cutting is not accurate enough, the yield rate of jumbo heads and tails will also be reduced.
Conclusion
In summary, the yield rate of jumbo head and tail cutting depends on the quality of the billet, the performance and accuracy of the cutting equipment, and the reasonable operation of the cutting process. In order to improve the yield rate of jumbo head and tail cutting, it is necessary to take effective measures in these aspects to ensure that the cutting process reaches the best state.
