AN INTRODUCTION TO THE OPERATING PROCEDURE OF MODEL NM4925 BONE JIG SAW
Model NM4925 bone jig saw is a safe and reliable electric tool often used in medical centers and hospitals. It enables surgeons or technicians to cut hard and dense bones or biopsy specimens that they can encounter while doing their surgery or pre-operative preparations.
This tool can cut effectively through bone structure 30mm in thickness that are even harder than organs other than bones.
In order to help users understand the Model NM4925 bone jig saw and help them use it safely and effectively, we have prepared an operating procedure for this tool.
Before using the Model NM4925 bone jig saw, a user should read and understand the safety instructions and operating guidelines of the device. The user should also familiarize himself/herself with the operation and maintenance of the tool.
First, the user should inspect the bone jig saw for any loose or broken parts, faulty wiring, or other irregularities that may affect its performance. If any irregularities are noticed, the tool should not be used and it should be sent to a technician for inspection and repair.
Second, the user must attach a cutting blade to the bone jig saw before taking it into the operating room. The blade should be appropriately guided and mounted onto the cutting end of the tool. The correct blade size and cutting power should be selected based on thebone structure thickness.
Third, once the chosen cutting blade is in place, the user should check and make sure it is securely in place and spinning freely. If the blade is not correctly installed and spinning correctly, the risk of an injury could occur.
Fourth, before making contact with the bone structure, the user should check the cutting power or speed of the cutting blade. If the cutting power is too high, the risk of injures to the patient or bystanders due to flying pieces of debris from the bone is increased.
Fifth, once the cutting blade is operating at the appropriate speed, the user must make sure that the cutting blade is fully inserted in the bone structure. The cutting blade should move slowly inside the bone structure and avoid making sudden movements. This will help prevent stress to the bone and minimize the risk of fractures or breaks in the bone.
Sixth, once the bone structure has been cut, the user should make sure to properly dispose of the unused cutting blades and also properly oil the cutting blade to prevent corrosion and keep it in a proper working condition.
The user should also regularly inspect and maintain the bone jig saw. The user should check the cutting blade for any signs of wear and tear and if any signs of wear and tear are noticed, the blade should be replaced immediately. Furthermore, the user should check the handle, the power cord and the power switch of the bone jig saw for any signs of wear and tear or damage, and if observed, the bone jig saw should be sent to a technician for repairs.
We hope that this operating manual has helped you in understanding how to use the Model NM4925 bone jig saw in a safe and effective manner.
