Pressure Regulation Measures of Taut Wire Single Line Rolling Mill Turbulence System
With the development of the automobile industry and the reform of domestic enterprises, the production scale and technology of single-line rolling mills and automobile turntables have been continuously improved. The taut wire single-line rolling mill and automobile turntable are two important equipment in the automobile manufacturing industry. In order to ensure the quality of car production, the taut wire single-line rolling mill must be equipped with a turbulence system to reduce the vibration of the machine and improve production efficiency during the production process.
The working principle of the taut wire single-line rolling mill turbulence system is mainly based on regulating the pressure of the water in the water source equipment to achieve the desired vibration reduction effect. The pressure regulation of the taut wire rolling mill turntable system mainly adjusts the pressure of the water source equipment and various elements connected to the system, By manipulating the pressure of the water source equipment and its elements, the pressure control of the taut wire taut wire pressure is usually achieved.
In the pressure regulation of the taut wire single-line rolling mill and automobile turntable system, the pressure of the water source is the starting point. It is necessary to measure the pressure of the water source equipment at the beginning and ensure that it meets the design requirements. Generally, the pressure of the water source equipment is generally about 1.8MPa. It is important to ensure that the pressure of the water source equipment always remains within the range of 1.8MPa.
The next step in the pressure regulation of the taut wire single-line rolling mill and automobile turntable system is to regulate the pressure of the elements connected to the system. Different types of products require different settings of the pressure settings of the connected elements. Generally speaking, if the water pressure required by the components in the system is greater than 1.5MPa, the pressure limit switch should be set up to limit the output pressure of the system.
In addition, the pressure of the connected element can be adjusted in real time during the production process. For example, during the production process, when the pressure of the water source equipment is too high, the pressure regulating valve of the connected element can be adjusted to reduce the pressure and balance the pressure of the system. During the process, it is also important to pay attention to the flow rate of the water source equipment, and ensure that it meets the requirementsof the instruction manual.
Moreover, it is also necessary to pay attention to the maintenance of the pressure regulating valve of the taut wire single-line rolling mill and automobile turntable system. Pay attention to cleaning the valve during every maintenance of the system, prevent the cumulation of sand and other debris blocking the valve, and adjust the pressure of the water source equipment regularly.
In summary, pressure regulation measures are very important for the smooth running of the taut wire single-line rolling mill and automobile turntable system. It is necessary to strictly follow the operating instructions of the water source equipment, measure the pressure of the water source equipment at the beginning, and regulate the pressure of the elements connected to the system in real time during production. In addition, it is necessary to regularly maintain the pressure regulating valve and the entire system to ensure the smooth production of the taut wire single-line rolling mill and automobile turntable.
