High-speed Flanging Machine Oil Pump Return Oil Failure Emergency Treatment
High-speed flanging machines are widely used in metallurgy and other industries. When using such equipment, we must first understand its structure, principle and working characteristics. At the same time, we must be familiar with its performance and operational conditions. High-speed flanging machines are complex in structure, and sometimes we must find ways to solve a variety of problems. Today, Ill share what to do when the high-speed flanging machines oil pump return oil fails.
First, we should check why the high-speed flanging machines oil pump return oil failed. Does it cause insufficient oil supply due to oil pump suction filter damage? Has the engine oil pressure turned too low and can no longer provide enough power to the oil pump? Excessive accumulation of oil in the oil return pipe? Any other problems? We must determine the cause of the problem before we can proceed to the next step.
Second, according to the cause of the failure of the oil pump return oil of the high-speed flanging machine, we can determine how to solve the problem. If the oil pump suction filter is damaged, or the engine oil pressure is too low, we must stop the machine and repair or replace the damaged parts, and then check whether the machine is running normally. If the oil return pipe is blocked, we need to open the pipe and clean up the oil. If it is caused by other problems, we need to find out the root cause and then take corresponding measures.
Third, we must make sure that the high-speed flanging machines oil pump return oil failure is completely solved before we can restart the machine. Be sure to check again to make sure the oil pump works properly. If conditions permit, we need to test the oil pump flow and pressure. After confirming that everything is running properly, we can start up the machine.
The above is an introduction to the emergency treatment of the failure of the oil pump return oil of the high-speed flanging machine. In use, we must familiarize ourselves with the structure, principle and working characteristics of the equipment to better use it. Of course, regular maintenance is also necessary. For any failures that occur on the equipment, we must be sure to find the real cause and take appropriate action to make the machine perform better.
