Iron water tank sidewall air blowing slaggings removing technology
Introduction
Iron water tank sidewall air blowing slaggings removing technology refers to the combination of mechanical and chemical methods, with compressed air blowing and scraping plate as the main mechanical cleaning methods, alkaline solution as the main chemical cleaning agent, and other auxiliary mechanical and chemical cleaning methods. The application of this technology mainly uses compressed air to clean the scale remaining on the walls of the iron water tank, which can quickly and easily remove stubborn slag on the tank walls without destroying the tank surface.
Advantages
There aremany advantages of using Iron water tank sidewall air blowing slaggings removing technology which includes:
1. It is a non-destructive cleaning method. This cleaning method does not cause mechanical damage, and can clean the original surface of the tank without causing damage.
2. Clean without residue. After air blowing, the scale can be completely removed without leaving any residue, thus avoiding secondary pollution.
3. High efficiency. The compressed air blowing method is fast and the cleaning area is large. It can reduce labor intensity and improve work efficiency.
4. No environmental pollution. During the cleaning process, no dust, smoke and other gases will be generated, which meets the requirements of environmental protection.
5. Easy to operate. This cleaning method is relatively easy to operate, and it is easy to understand.
Principle
The principle of Iron water tank sidewall air blowing slaggings removing technology is mainly to use compressed air to take away the scale on the tank surface. The air flow is generated by a special compressor while the compressed air is used to blow away the scale or slag on the surface of the tank by the special nozzle gun. The principle is mainly based on the Venturi effect of the nozzle. After the compressed air is output from the nozzle, the pressure of the compressed air is greatly reduced and a vacuum is formed. The air is then sucked in from the surrounding and the scale is forcibly removed by the air flow.
Process flow
The process of Iron water tank sidewall air blowing slaggings removing technology can be divided into several steps in order to ensure that the slag and scale are effectively removed. The steps are as follows:
1. Pressure test: Before cleaning, the pressure test of the iron water tank should be performed to make sure that the tank surface and its internal structure can bear the pressure of the cleaning.
2. Preparation of cleaning equipment: Check the working condition and pressure of the air compressor, the air outlet pressure of the nozzle gun, and the operation conditions of other accessories.
3. Preparation of cleaning solution: Prepare a cleaning solution composed of alkaline solution, oxygen scavenger, surfactant and other components.
4. Cleaning: Use compressed air to blow away scale and slag on the wall of the tank.
5. Water washing: Use water to clean tank surface and remove residual scale and slag.
Conclusion
Iron water tank sidewall air blowing slaggings removing technology is a fast and effective method to clean the tank wall, which can reduce the labor intensity, improve the work efficiency and avoid secondary pollution. All of these advantages make the air blowing method an ideal choice for tank cleaning.
