In early spring, it is necessary to pay attention to the use of agricultural machinery to ensure the smooth progress of spring production work.
First, it is necessary to check that the mechanical parts should be properly inspected before the machine can be used. It is necessary to check if all the screws on the machine are loose, and to check whether the accessories such as bolts, nuts and washers are damaged. In addition, the operator should check the fuel supply pipe, oil seal and other parts to make sure that they are in good condition.
Also, it is important to lubricate the moving parts of the machine regularly. Because the moving parts of the machine will oxidize and fuse to the corresponding parts in a humid environment, regular lubrication can reduce wear on them. For the appropriate operation parts, vegetable oil, crude oil and other general lubricants should be used for lubrication.
At the same time, users should pay attention to the working hours and inactivity time of the machine. Different kinds of machines have different working time. The motor or internal combustion engine should not be in operation for too long at a time. When the machine has not been used for a long time, turn the machine clockwise several times to make the internal moving parts run with the oil, and the machine can be placed at rest reliably.
In addition, when the machine is operating, it must be checked whether the temperature of the machine is increasing abnormally. If the temperature rise is too high, the machine should be stopped immediately to check whether there is a problem with the cooling system. When the outside temperature is high, special attention should be paid to it.
Finally, it is of great importance to ensure strict protection of the machine when idle or in operation. Special attention should be paid to the safety of electric motors, internal combustion engines and the safety of operators. It is necessary to cut off the electricity supply in time when leaving the machine temporarily, and to close the gasoline supply door when leaving the machine with internal combustion engine.
Therefore, when using agricultural machinery in early spring, in addition to the above four points, it is necessary to pay attention to the safety operation of the machine, so as to avoid casualties and ensure the smooth progress of spring production work.
