Steam Free Forging Hammer Procedure
Steam free forging hammer is a machine tool used to forge various materials in factories and workshops. It uses compressed air to form a high-speed jet to drive the forging hammer to reciprocate in a certain direction and hit the forging parts. It has the characteristics of simple operation, small installation area, energy saving, environmental protection, and low noise. The following is a steam free forging hammer operation procedure:
1. Before booting:
(1) Before start-up, it is necessary to check whether the transmission mechanism of the steam free forging hammer is in good condition. If the fuel level is not normal, please replace it in time before starting up.
(2) Check the connection parts of the steam free forging hammer, make sure there is no phenomenon of loosening, leak, corrosion and other parts, if there is no problem with the parts, the connection screw is tightened.
(3) Check the air compressor of the steam free forging hammer, check whether it is in good air pressure, and adjust the air pressure in time if there is a problem.
(4) Check the lubricating system of the steam free forging hammer, if the oil pressure is not enough, it should be supplemented in time.
2. Start up:
(1) When starting up the steam free forging hammer, cut off the power to the feeder and the steam generator, and then turn the switch of the steam generator to the on position.
(2) When the pressure of the steam generator reaches the required limit, turn on the power of the feeder and start up the steam free forging hammer.
(3) Then adjust the parameters of the steam free forging hammer, adjust the steam pressure, adjust the angle of the forging hammer, adjust the angle of the flange and other parameters in order to make the forging parts more appropriate.
3. Boot troubleshooting:
(1) If the steam generator of the steam free forging hammer is unstable during startup, please check whether the power supply voltage is normal and whether the exhaust port of the steam generator has foreign objects.
(2) If the connection of the steam free forging hammer parts is not tight, you must check the screws to tighten them.
(3) If the oil pressure of the steam free forging hammer is not enough, please supplement it in time.
4. Maintenance:
(1) Regularly check the lubrication system of the steam free forging hammer, whether the oil level is normal or not, if necessary, please add lubricant in time.
(2) Regularly check the air pressure of the steam free forging hammer, and check whether the air pressure is normal or not, if there is a problem, please adjust and fill in time.
(3) Check the various parts of the steam free forging hammer regularly and find out some problems and solve them in time.
5. Shutdown:
(1) Cut off the power supply of the steam generator and the feeder, then turn the power switch of the steam generator to the “off” position.
(2) Turn off the steam generator switch.
(3) After the steam free forging hammer ceases to work, all machining safety protection devices should be securely closed.
The above is the specific procedure for steam free forging hammer operation. It is hoped that after reading, the operator can comprehend completely, recognize that all the safety protection measures should be done, understand the importance and necessity of the use of safety protection devices, and always keep a high degree of vigilance during the use process, so as to ensure harmless production.
