，内容要有：
Stamping die parts
1. Punch: A punch is a hard metal rod with a specially designed tip or shape that is used to press into a die to cut or shape sheet metal or other materials.
2. Die plate: Die plate is the main part of molds. It is the part that holds the die, die insert and the other components that are part of a stamping die. It is usually made from high quality steel and helps to keep the dies and other components stable during the stamping process.
3. Die insert: A die insert is a specially designed piece that is mounted into a die plate and is used to create shapes or forms on sheet metal or other materials.
4. Stripper plate: A stripper plate is a flat piece of metal that is used to hold the material tightly during the punching process and to help remove the part from the die after it has been cut or formed.
5. Guide bush: A guide bush is a part used to guide the material into the die and to ensure that it is properly positioned before the punch is pressed into it.
6. Guide post: A guide post is a part that is attached to the die plate and is used to guide the material into the die during the punching process.
7. Ejector pin: An ejector pin is a specially designed part that is inserted into the die plate and is used to push the material out after the punching and forming process is complete.
8. Ejector sleeve: An ejector sleeve is a part that is mounted into the die plate and is used to help remove parts from the die plate after the punching and forming process is complete.
9. Stripper bolt: A stripper bolt is a part used to hold the material in place during the punching process and to allow for easy ejection of the part after the punching process is complete.
10. Tapping screw: A tapping screw is a type of fastener that is used to attach various components to the die plate.
11. Spring: A spring is a device that is used to help keep components in place and to provide pressure during the punching process.
12. Washer: A washer is a type of spacer device that is used to provide extra space between components and help keep them in place.
13. Adjustment nuts: Adjustment nuts are used to adjust the position of components during the stamping process.
14. Bushings: Bushings are used to keep components from moving during the stamping process.
15. Lock pins: Lock pins are used to secure components in place during the stamping process.
