Application of Special Control Measurement Technology for Short Side
In recent years, with the rapid development of industrial production technology and the improvement of automation equipment, special control measurement technology for short side has gradually become an important production technology. The special control measurement technology for short side can measure the length and angle of the short side at the same time, which can improve the effect of finishing and reduce production costs.
The short side control measurement technology uses a two-dimensional imaging sensor and an adjustable edge-moving device to construct an imaging measurement loop. The process is as follows: First, adjust the detection accuracy and front-end system parameters. Then move the two-dimensional imaging sensor to the position near the measured target, adjust the specified edge moving device, and position the target into the image coordinate system. Then adjust the focus distance and field angle of the sensor to focus on the measuring object. Finally, adjust the parameters of the light source and the parameters of the image analysis software.
Once the system parameters have been properly adjusted, the imaging measurement loop can begin to work accurately. The process of data generation is as follows: The two-dimensional imaging sensor will capture the image of the object being measured, and the imaging measurement loop will then use a series of image processing algorithms to quickly process the image data and calculate the length and angle parameters of the target according to the specific control measurement principle. After the data is generated, it will be transmitted to the host computer. The application software running on the computer will then display the measurement result on the screen for the operator to view.
The advantage of short side control measurement is that it can quickly measure the shape and size parameters of the measured object with a small measuring error. It is widely used in industrial production and can realize automatic control production. In addition, because the system is compact and easy to install and can achieve fast response and accurate measurement, it has high practicality and economic value.
In conclusion, special control measurement technology for short side has a broad application prospects in industrial production. The use of two-dimensional imaging sensor and adjustable edge-moving device to construct an imaging measurement loop can quickly measure the length and angle of the short side, which can improve the effect of finishing and reduce production costs. In the current industrial automation, this technology is of great significance and is worth further developing.
