The Trend of Dust Removal in Rotary Furnace: From Wet to Dry
dust removal in rotary furnace was traditionally handled via wet processes, such as wet scrubbing and water sprays. However, dry dust removal processes have been gaining ground in recent years due to the increased efficiency and cost savings they offer.
In wet scrubbing and water sprays, the process of water is used to capture and remove dust particles from the exhaust gases. The water is then treated in a wastewater treatment plant before being discharged. The water treatment process is costly, and the wastewater often contains potentially hazardous materials that require strict handling and disposal regulations. There is also the possibility that the scrubbing process could cause acid deposition, which can harm the environment.
On the other hand, dry dust removal systems, such as fabric filters and electrostatic precipitators, remove dust particles via physical and electrical methods. These systems are much more efficient than wet methods, and they are also less costly to install and operate. Unlike wet scrubbing and water spray systems, dry dust removal techniques such as fabric filters and electrostatic precipitators dont require complex wastewater treatment processes or the handling of potentially hazardous materials. This eliminates the need for expensive wastewater treatment plants and complies with more stringent environmental regulations.
In addition, dry dust removal systems are much more efficient at capturing dust particles than their wet counterparts. Fabric filters have been found to be up to 98% efficient, while electrostatic precipitators can remove up to 98.7% of particulate matter. This means that the amount of dust generated at the site is greatly reduced and the exhaust gases can be safely discharged.
The advantages of dry dust removal processes have prompted many industrial companies to switch from wet dust removal to dry dust removal in their rotary furnaces. The long-term cost savings associated with these systems make them attractive to many operations, and the increased efficiency makes them an attractive alternative to traditional wet processes.
Overall, the trend for dust removal in rotary furnaces is moving from wet to dry processes. Although wet scrubbing and water spray processes can be effective, the cost savings and environmental benefits associated with dry dust removal processes make them an attractive option for many operations. With the improved efficiency of these systems, industrial companies can reduce emissions and save money in the long-run.